Application: | Bathroom |
---|---|
Motor: | Condenser |
Blower Wheel Type: | Sirocco |
Motor Bearing: | Ball |
Mount: | Ceiling Recessed |
Mounting Opening: | 10-1/2" |
Grille Size: | 13" |
Material: | Galvanized Steel |
Duct Size: | 6" 4" |
Voltage: | 120v |
Hertz: | 60 |
Wattage: | 21.1 |
Air Flow Capacity (CFM): | 110 |
Features: | Double Hanger Bar Built-in Damper Energy Star Qualified |
Sone: | < 0.3 |
Thermal Fuse Protection: | Yes |
Height (Inches): | 10.83" |
Width (Inches): | 14.17" |
Depth (Inches): | 16.73" |
Warranty: | 3 Year (Parts) |
From what I see, the height of the unit is a little under 11". So either you need a 2x12 ceiling joist or clearance above the bottom of whatever joist size you have.
I have two version. I install low profile version in 1st floor bathroom and standard profile in top floor bathroom. If there is a concern, I recommend low profile fan instead. Thanks Elijah
No it does not. The version that includes the light can be found here: http://www.supplyhouse.com/Panasonic-FV-11VFL4-WhisperFit-Lite-110-CFM-Ceiling-Ventilation-Fan-w-Light
It is recommended that for bathrooms of less than 50sq feet, a fan of 50 CFM is sufficient. For bathrooms between 50 and 100 sq ft. use 1 CFM per sq ft of floor space. For bathrooms over 100 sq ft add the CFM requirement for the following fixtures: (50 CFM for each toilet, shower, bathtub or hot tub)
This product weight approximately 10.5 lbs.