Barber Colman Thermostat Accessories are guards, covers, subbases, and calibration tools used to protect and service legacy Barber Colman pneumatic thermostats still running in older commercial buildings. The category includes the AT-1103 wire thermostat guard, which shields a wall thermostat from accidental bumps or tampering, along with subbases like the AT-602 that add a DP4T switch for system mode selection. Pneumatic contractors working on older commercial buildings use these accessories to keep original Barber Colman thermostats in service rather than replacing an entire pneumatic control branch. Because many of these buildings still run on compressed air control loops rather than modern electronic controls, matching a guard, cover, or subbase to the exact thermostat model on site keeps mounting holes and switch functions aligned without modifying the original control panel.
Subcategories
Buying Guide
Start by identifying the exact thermostat model installed on site before ordering any accessory, since guards, covers, and subbases are sized to specific thermostat body dimensions and mounting hole patterns. A cover or guard built for one Barber Colman thermostat body will not necessarily fit a different model, so confirming the model number stamped on the existing unit avoids a return trip for the wrong part.
Next, decide what problem the accessory needs to solve. A guard protects an exposed thermostat from tampering or impact damage in a public hallway or classroom, a cover conceals a decommissioned or unused thermostat location, and a subbase adds manual switch functions such as mode selection that the thermostat body alone does not provide. Barber Colman Thermostat Accessories cover all three needs within model-specific part numbers, so matching the accessory type to the actual service need narrows the search quickly.
Subbase selection depends on how many switch functions the application needs. A single unit subbase such as the AT-602 covers one switch function, while a dual unit subbase such as the AT-608 supports two separate switches from the same mounting location, which matters on systems that need both a mode selector and an additional manual override.
Finally, keep a calibration kit on hand for service visits, since a pneumatic thermostat that reads inaccurately often needs recalibration rather than full replacement, and having the correct kit on the truck turns a diagnostic call into a same-visit repair.
Frequently Asked Questions
What is the AT-1103 wire thermostat guard used for?
The AT-1103 wire thermostat guard mounts over an exposed wall thermostat to prevent accidental adjustment or physical damage in public or high-traffic areas. Its open wire cage design still lets a technician read the thermostat dial through the guard.
What does a blank thermostat cover accomplish?
The AT-11-404 blank thermostat cover conceals a thermostat location that is being decommissioned while leaving the wall box and wiring in place for future use. A cover keeps the wall opening finished without patching drywall around the old mounting location.
What does a subbase add to a Barber Colman thermostat installation?
A subbase mounts between the thermostat and the wall to add manual switch functions, such as the DP4T switch on the AT-602 single unit subbase. Subbases let building occupants or operators select system modes like heating, cooling, or off directly at the thermostat location.
What is included in the pneumatic thermostat calibration kit?
The 900-002 calibration kit provides the tools a technician needs to verify and adjust a pneumatic thermostat's output against a known reference before returning it to service. Technicians use the kit to diagnose drift or inaccurate readings on an existing pneumatic thermostat without replacing the unit.
Are Barber Colman thermostat accessories still supported for older pneumatic systems?
SupplyHouse carries guards, covers, subbases, and calibration kits sized for legacy Barber Colman pneumatic thermostats still in service in many commercial buildings. Stocking the correct accessory part number for an installed thermostat model keeps an older pneumatic control branch running without a full system replacement.