Black Reducer Couplings are couplings with two different listed sizes, used to join black pipe or fittings of unequal diameter. The Anvil models sampled in this category are listed as Class 150, and listed sizes include 3/4 inch x 1/2 inch, 1 inch x 1/2 inch, 1 inch x 3/4 inch, 1-1/4 inch x 1/2 inch, and 1-1/4 inch x 3/4 inch. Ward Black Domestic Fittings are now sold as Anvil fittings, because Anvil's parent company, ASC Engineered Solutions, has acquired Ward. Contractors who know the Ward name should look for the Anvil brand on these listings. Reducer couplings matter because the two sizes in each listing have to match the piping being joined, and a wrong pick means a return trip and a stalled job. Class 150 is part of the product name on each coupling sampled, so it is the first designation to confirm.
Subcategories
Buying Guide
Start with the two sizes. Each coupling sampled here lists a large end and a small end, such as 1 inch x 3/4 inch or 1-1/4 inch x 1/2 inch, and both have to match the pipe or fittings being joined. Reading the title carefully avoids ordering errors such as swapping one size pair for another.
When comparing Black Reducer Couplings, confirm the class next. The Anvil couplings sampled here are listed as Class 150, and that designation appears in each product name. Match it to the class called for in the job spec rather than assuming it from the size.
Check the brand and legacy name as well. Ward Black Domestic Fittings are now sold as Anvil fittings, so a spec or older invoice that names Ward points to the Anvil brand. Confirm the exact size and class on the listing before substituting.
Finally, count each size pair separately on the takeoff. The listings include several different pairings, and quantities for 3/4 inch x 1/2 inch cannot cover a need for 1 inch x 3/4 inch. A short list of size pair, class, and quantity for each line keeps the order accurate and the job moving. Matching those three details against the plan before checkout prevents a return trip. Small sizing mistakes are easy to miss until installation.
Frequently Asked Questions
What are black reducer couplings used for?
Black Reducer Couplings join pipe or fittings of two different sizes. Each listing names both sizes, such as 3/4 inch x 1/2 inch or 1-1/4 inch x 3/4 inch. Contractors match both to the piping on the job.
What class are the Anvil black reducer couplings?
The Anvil black reducer couplings sampled in this category are listed as Class 150. The class appears in each product name. Check the job spec for the required class before ordering Black Reducer Couplings.
Did Ward black reducer couplings become Anvil?
Ward Black Domestic Fittings are now sold as Anvil fittings, because Anvil's parent company, ASC Engineered Solutions, has acquired Ward. The Black Reducer Couplings sampled here show Anvil as the brand. Confirm the size and class when replacing an older Ward item.
What sizes of black reducer couplings does Anvil list?
Anvil Black Reducer Couplings sampled here include 3/4 inch x 1/2 inch, 1 inch x 1/2 inch, 1 inch x 3/4 inch, 1-1/4 inch x 1/2 inch, and 1-1/4 inch x 3/4 inch. Check the category page for the full range of size pairs. Read the title on each listing to confirm the pairing.
How do I pick the right black reducer coupling?
Match both sizes to the pipe or fittings being joined, then confirm the class. The Black Reducer Couplings sampled here are Class 150. Use the listing title to verify the size pair before ordering.