CPVC Schedule 80 Reducer Bushings (Spigot x Socket) are fittings that step a CPVC connection to a smaller size in a Schedule 80 system. The listing includes Spears flush style reducer bushings, such as the 3/4" x 1/2" size. Spears designs its Schedule 80 CPVC fittings with computer generated stress analysis, and material reinforcement is placed in stress concentration areas for improved pressure handling capability. Listed sizes include 3/8" x 1/4", 1/2" x 1/4", 3/4" x 1/2", 1-1/4" x 1/2" and 1-1/4" x 3/4", so the exact size pair is the first detail to confirm on a material list. Installers use a spigot x socket reducer bushing to change pipe size at a fitting socket without adding extra fittings to the run. Choosing the right bushing matters because a wrong size or schedule means a teardown after the joint is cemented, and that costs labor.
Subcategories
Buying Guide
Start with the size pair. Each bushing carries two sizes in its name, such as 3/4" x 1/2" or 1-1/4" x 3/4", and the pair has to match the fitting being reduced and the pipe size the run needs. Read both sizes off the material list and the installed fittings before ordering.
Next, confirm the pressure class. The bushings in this group are Schedule 80 CPVC, so they belong on Schedule 80 systems. Mixing a Schedule 80 bushing into a different schedule or a different pipe material is a design decision that belongs with the engineer of record or the system specification.
Then check the connection type. Spigot x socket means one end is a spigot and the other end is a socket. Confirm the fitting receiving the bushing has a matching socket.
When comparing CPVC Schedule 80 Reducer Bushings (Spigot x Socket), look at the brand and the published description. The Spears bushings on this listing use computer generated stress analysis in their design, with material reinforcement placed in stress concentration areas. Keep one brand across the fittings on a job where possible so the parts come from one product line.
Finally, order a few extra of the common small sizes for the truck. Reducing bushings are easy to miss on a takeoff, and a missing size stops the install.
Frequently Asked Questions
What does spigot x socket mean on a CPVC reducer bushing?
On CPVC Schedule 80 reducer bushings (spigot x socket), one end is a spigot and the other end is a socket. The size pair in the product name tells the installer which two sizes the bushing connects. Check the pair against the fitting and the pipe before cementing.
Are the Spears reducer bushings Schedule 80?
Yes. The Spears reducer bushings in this category are listed as CPVC Schedule 80 flush style reducer bushings. Spears describes its Schedule 80 CPVC fitting designs as combining proven experience with computer generated stress analysis.
What sizes do the CPVC Schedule 80 reducer bushings come in?
Listed sizes include 3/8" x 1/4", 1/2" x 1/4", 3/4" x 1/2", 1-1/4" x 1/2" and 1-1/4" x 3/4". Other size pairs may be listed on the category page, so confirm the exact pair on the product page before ordering.
How do I pick the right reducer bushing size?
Read the two sizes in the product name, such as 1-1/4" x 3/4", and match them to the fitting and the pipe on the job. CPVC Schedule 80 reducer bushings (spigot x socket) are sized by that pair, so a quick check against the material list avoids a wrong order.
Why does Spears reinforce its Schedule 80 CPVC fittings?
Spears states that material reinforcement is placed in stress concentration areas for improved pressure handling capability. The reinforcement is part of the design of its Schedule 80 CPVC fittings, including the reducer bushings on this listing.