Cast Brass Crosses are four-port fittings that join four runs of pipe or tube at one junction. The Elkhart crosses in the catalog sample are made of cast brass and are listed as lead free in sizes of 1/2", 3/4", and 1". Installers use a cross when a layout calls for one junction that serves four connections. Choosing the correct size matters because each port has to match the pipe or tube that meets it. The lead free listing matters too, since the product name is what an installer checks against the project requirements and local code. Reading the full product description before ordering confirms the connection type, which the sample records do not state. Doing that check at the counter or on the quote saves a return trip once the crew is on site.
Subcategories
Buying Guide
Start with the size, because every port on a cross has to match the pipe or tube meeting it. The Elkhart sample shows cast brass crosses in 1/2", 3/4", and 1". Confirm the nominal size on the drawing, then confirm the connection type on the product page, since the sample records do not state one.
Second, check the lead free status. The 1/2" and 1" records list Lead Free: Yes, and the 3/4" product name carries a lead free label. Projects that handle drinking water usually set requirements for lead content, so compare the product record with the specification and local code.
When comparing Cast Brass Crosses, think about how many of the four ports the layout actually uses. A cross with an unused port needs that port plugged or capped, and a tee is often the simpler fitting when only three connections are needed.
Material is another check. Every cross in the sample is cast brass, so it should be compared with the other metals in the system, such as the pipe and valves. Finally, verify the full product description for pressure and temperature ratings, since the sample records do not state them. Ratings drive the selection on any pressurized line, so settle them before the order goes in.
Frequently Asked Questions
What is a cast brass cross used for?
Cast Brass Crosses join four pipe or tube connections at one junction. They are used in layouts that need a single junction serving four connections. Confirm the connection type on the product page.
Are Elkhart cast brass crosses lead free?
The Elkhart crosses in the sample are listed as lead free in their product names, and the 1/2" and 1" records list Lead Free: Yes. Cast brass crosses for potable work should still be checked against local code. Review the product record before ordering.
What sizes do cast brass crosses come in?
The sample shows 1/2", 3/4", and 1" Elkhart cast brass crosses. Other sizes may exist in this category, so check the listing for the full range.
What material are these crosses made of?
The Elkhart crosses in the sample list cast brass as the material. Compare the cast brass body with the pipe and valve metals on the job. The records don't state other material details.
Do cast brass crosses need all four ports used?
Cast Brass Crosses have four ports, and an unused port needs to be plugged or capped. A tee is often simpler when a layout needs only three connections. Confirm the layout before ordering.