Garbage Disposal Installation Tool

Turn your garbage disposal installation from a 2-person job into a quick 1-person job with the Danco Garbage Disposal Installation Tool! The Danco Garbage Disposal Installation Tool makes garbage disposal installation easy with just three simple steps: hook, lift and lock. Rather than straining to lift the garbage disposal from below the sink while trying to line up the locking tabs, use the Danco Garbage Disposal Installation Tool to lift it from above your kitchen sink and easily secure it so that it is easy to engage the locking tabs. This installation tool works with various garbage disposal brands including InSinkErator, Kuppet, Whirlaway and Waste-King.

Features:

• This Garbage Disposal Installation Tool turns a time consuming 2 person job into a quick 1 person job
• Allows the weight of the garbage disposal to hold down the flange while installing the mounting hardware
• Simple threaded shaft and spin down locking nut can be used along even in crowded installation spaces
• This Installation Tool will help install various garbage disposals including InSinkErator, Kuppet, Whirlaway, and Waste-King products
• Installation Steps: Drop the hook down through the drain opening into the disposal, then pull up to center it inside the grinding chamber; raise the disposal up through the drain opening until it engages with the sink flange and then apply tension to the spring; slide the chain into the locking bar, maintaining the tension on the spring and then let go; the disposal is now secure for you to reach under the sink and engage the locking collar with EASE