Flare Elbows are brass elbow fittings used for flare connections in plumbing work, and the catalog records list 3/8", 1/2", and 5/8" sizes. The Bluefin models in the records list brass alloy C3604, a flare connection type, and a plumbing application. Jones Stephens elbows appear on the page with the designations 55-6 and 55-10. Each record lists size in its specifications, and the Bluefin records add material and connection type. Contractors use flare elbows where a flared tube run needs to turn at a corner or tight spot. Size is the first thing to confirm, and the product title carries it, so matching a fitting to the tube is quick. Picking the correct elbow matters because a flare joint depends on the fitting matching the tube size, and a mismatch means rework on the job.
Subcategories
Buying Guide
Start with tube size. The catalog records show 3/8", 1/2", and 5/8" sizes, and the size in the title has to match the flared tube on the job. Confirm the size on the existing line before ordering. Next, check the connection type. The Bluefin records list flare as the connection type, so confirm the tubing and mating fittings are made for flare connections. Then compare the material and alloy information. The Bluefin records reviewed list brass with alloy C3604, while the Jones Stephens records list size only in their specifications and carry brass in the product title. When a project requires documented alloy or material details, the Bluefin records give more to work with. Choosing Flare Elbows by brand matters less than matching size and connection, but staying with one brand on a job keeps part numbers consistent. Look at the part designations as well. The Jones Stephens elbows are listed as 55-6 for 3/8" and 55-10 for 5/8", so note the designation on the takeoff. Verify the application against the product page, since the Bluefin records list plumbing as the application. Confirm anything else, such as pressure ratings or approved uses, with the manufacturer, since the catalog records reviewed don't state them. Group the order by size so the crew has what it needs for every corner on the run.
Frequently Asked Questions
What sizes do Flare Elbows come in?
The catalog records for Flare Elbows show 3/8", 1/2", and 5/8" sizes. Bluefin lists 3/8" and 1/2", and Jones Stephens lists 3/8" and 5/8". Confirm the size on each product page.
What are the Bluefin flare elbows made of?
The Bluefin flare elbows in the catalog records are made of brass with alloy C3604. The connection type is flare and the application is plumbing. Check the product page for the exact model.
What are the Jones Stephens flare elbow part designations?
The Jones Stephens records show (55-6) for the 3/8" Brass Flare Elbow and (55-10) for the 5/8" Brass Flare Elbow. These Flare Elbows list size in the specifications. Confirm any other specifications with the manufacturer.
What connection type do flare elbows use?
The Bluefin Flare Elbows in the records list the connection type as flare. Mating tubing and fittings should be made for flare connections. Confirm the connection type on the product page for any elbow before ordering.
Do the records list pressure ratings for flare elbows?
The catalog records reviewed for Flare Elbows list size, and for Bluefin, material, connection type, application, and alloy. They don't list pressure ratings. Confirm ratings with the manufacturer before specifying a fitting for a job.