Inlet Guards for Round Ducts are wire ring guards that prevent foreign objects from entering the duct line. The Fantech IG Series includes guards for 4, 5, 6, 8 and 10 inch duct. Each guard is made of zinc chromate plated steel. Installers use them on a duct inlet where foreign objects could otherwise get into the line. Because the guard is sized to the duct, the nominal duct size is the first spec to confirm. Listings name the duct size directly, as in IG Series Inlet Guard for 6 inch duct, which makes matching quick. Getting the size right matters because a poorly sized guard may not protect the duct line from foreign objects. Pairing the right guard with each duct size is a quick check during a parts takeoff.
Subcategories
Buying Guide
Begin with the duct size. The Fantech IG Series includes guards for 4, 5, 6, 8 and 10 inch duct, and the guard has to match the duct it protects. Confirm the nominal size on the plans or on the duct itself before ordering. Measure the diameter rather than guessing from the look of the duct.
Next, consider the construction. When comparing Inlet Guards for Round Ducts, note that the IG Series guards are wire ring designs made of zinc chromate plated steel. The wire ring is made to prevent foreign objects from entering the duct line, so it fits applications where debris is the concern.
Then think about the application. Decide what could reach the inlet on the job, such as debris or other foreign objects, and confirm the guard suits that risk. Check the manufacturer's literature if airflow or code requirements apply to the installation. Installers handling several duct sizes should also verify each guard against its listing before the crew leaves the shop.
Finally, plan the order by duct size. Count the inlets on the job by diameter and match each to the listing that names that duct size, such as the guard for 8 inch duct or the guard for 10 inch duct. A quick tally by size keeps the order accurate and the install moving.
Frequently Asked Questions
What are inlet guards for round ducts used for?
Inlet Guards for Round Ducts are wire ring guards used to prevent foreign objects from entering the duct line. The Fantech IG Series is one example. Pick the guard that matches the duct size.
What duct sizes do the IG Series inlet guards cover?
The Fantech IG Series inlet guards for round ducts include 4, 5, 6, 8 and 10 inch sizes. Each listing names its duct size. Match the guard to the nominal duct size on the job.
What are the IG Series inlet guards made of?
The IG Series Inlet Guards for Round Ducts are made of zinc chromate plated steel. They are wire ring guards. Each is sized to a specific duct diameter.
How do I match an inlet guard to my duct?
Match the duct size listed for the inlet guard to the nominal size of the round duct. The listings name the size directly, such as IG Series Inlet Guard for 5 inch duct. Inlet Guards for Round Ducts are sized to the duct, so a mismatch is easy to catch on the parts list.
Are the IG Series inlet guards a Fantech product?
Yes, the IG Series Inlet Guards for Round Ducts in this category are from Fantech. They are wire ring inlet guards in zinc chromate plated steel. Duct sizes include 4, 5, 6, 8 and 10 inch.