LegendPressCSG Tees (P x P x P) are Legend Valve tees with press connections, designed for installation onto ASTM A53 Schedule 10 to Schedule 40 carbon steel pipe. The listing includes 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch, and 1-1/2 inch sizes. Product descriptions list approval for fuel gas and compressed air applications and for indoor or outdoor use, with local inspector approval required before an underground installation. Product descriptions also state that press-to-connect end connections reduce labor costs and increase production, and the tees are compatible with Milwaukee and Rigid pressing tools and jaws for carbon steel press. A tee creates a branch in a pipe run, so contractors need the correct size and pipe schedule confirmed before any pressing begins. Choosing the correct size early keeps gas and air layouts clean and limits rework.
Subcategories
Buying Guide
Match the tee size to the pipe size on the job. Check the existing pipe markings or the plans for size before placing the order. The listing includes 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch, and 1-1/2 inch tees.
Confirm the pipe. Each sampled tee is designed for installation onto ASTM A53 Schedule 10 to Schedule 40 carbon steel pipe, so verify the schedule on the job falls in that range.
Confirm the application. When comparing LegendPressCSG Tees (P x P x P), check that the system is fuel gas or compressed air, which are the applications listed for approval, and that local code allows the use.
Check the tooling. Descriptions list compatibility with Milwaukee and Rigid pressing tools and jaws for carbon steel press. Verify that the crew's jaws cover each size needed.
Think about location. The fittings are described as approved for indoor or outdoor use. Underground work needs local inspector approval before installation, so raise it early in planning. Confirm with the local authority which installations need sign-off.
Finally, list the tees by branch and record each size before ordering. A tee on a 1 inch line and a tee on a 3/4 inch line are different parts, and a written list prevents mix-ups on site.
Frequently Asked Questions
What sizes of LegendPressCSG Tees (P x P x P) are listed?
The listing includes 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch, and 1-1/2 inch LegendPressCSG Tees, each with a Press connection type. Check the listing for any other sizes before ordering.
What pipe do LegendPressCSG Tees (P x P x P) fit?
The sampled LegendPressCSG Tees are designed for installation onto ASTM A53 Schedule 10 to Schedule 40 carbon steel pipe. Confirm the schedule on the job before ordering.
Are LegendPressCSG Tees approved for gas?
Product descriptions list LegendPressCSG Tees as approved for fuel gas and compressed air applications. Local code and inspector requirements still apply, so verify them on the job.
What press tools work on LegendPressCSG Tees?
Descriptions list LegendPressCSG Tees as compatible with Milwaukee and Rigid pressing tools and jaws for carbon steel press. Verify that the crew's jaws match each tee size before the job starts.
Can LegendPressCSG Tees go outdoors or underground?
Descriptions say the tees are approved for indoor or outdoor use. For underground installations, local inspector approval must be granted before installation. Check with the local inspector before committing to an underground layout.