Maestro PRO LED+ Single-Pole 3-Way Dimmer Switch, 120V, 250W (Gray)

Controls dimmable 150 W LED/CFL (screw-base) or 600 W incandescent/halogen loads. Provides true dimming from each location (with companion dimmers). Provides reliable dimming of dimmable LEDs/CFLs, as well as halogens and incandescents.

• Neutral Optional for LED, CFL, and Incandescent/Halogen; Neutral Required for ELV, MLV, dimmable fluorescent ballasts, and Hi-Lume 1% LED drivers
• Single pole or multi-location dimming from up to 9 locations with companion dimmer (MA-R-xx sold-separately)
• Advanced Programming Mode allows users to customize the controls preset light level, high- and low-end trims, disable indicator lights, fade times, and phase select
• Interchangeable color kits available for front panel (color change kit MK-D sold separately)
• Phase Auto-Select: Chooses between either reverse or forward phase (When neutral is connected the automatic default is reverse phase; When neutral is not connected, the automatic default is forward phase)
• Power failure memory; Should power be interrupted, the control will return to its previous state when power is restored
• Screw Terminals for easy install; Can be installed on either load or line side of circuit
• While load is on: Green indicator lights brighten and reflect light level; When load is off: Indicator lights remain in a soft glow state
• Maestro PRO LED+ dimmers and wall plates are available in 10+ colors (wall plate sold separately)