MegaPressG Flanges are Viega press-connection flanges designed for carbon steel piping systems, and they use Smart Connect Technology. The standard model 6659.5 is a Class 150 raised face flange, and every size from 1/2" to 2" uses a 4-bolt pattern. Each flange is carbon steel with a zinc-nickel coating, plus an HNBR sealing element, a grip ring, and a separator ring. The flange suits Schedule 10 through Schedule 40 carbon steel pipe, and MegaPressG holds a UL180 listing under Cert. No. MH65252. Viega also makes an XL version, model 6659.5XL, for 2-1/2", 3", and 4" pipe. Contractors use these flanges where a press-connected carbon steel run has to meet a flanged connection. Choosing the right flange class, face type, and bolt circle matters because a flange that does not match its mating connection stops the job until the right part arrives.
Subcategories
Buying Guide
Start with the flange class and face type on the mating connection. Model 6659.5 is a Class 150 raised face flange, while model 6659.5XL is a Class 125 flat face flange, so the two are not interchangeable when the mating flange has a specific face and rating.
Next, match the pipe size to the correct part number: 25761 for 1/2", 25766 for 3/4", 25771 for 1", 25776 for 1-1/4", 25781 for 1-1/2", and 25786 for 2". Then check the bolt pattern diameter against the mating flange. The standard sizes use a 4-bolt pattern with diameters from 2-3/8" on the 1/2" size to 4-3/4" on the 2" size.
Pipe type matters too. Both models are made for Schedule 10 through Schedule 40 carbon steel pipe, so verify the schedule on the job before ordering. When comparing MegaPressG Flanges against other flange options, keep in mind that the XL sizes must be installed with MegaPress XL rings and a PressBooster/Z3 actuator. Confirm the crew has that equipment before committing to 2-1/2" and larger.
Finally, check documentation. MegaPressG holds a UL180 listing under Cert. No. MH65252, and the XL flange also has an ABS Product Design Assessment. Confirm the approvals match the project spec, and send application questions outside the published data to Viega or the appropriate SupplyHouse team.
Frequently Asked Questions
What pipe do MegaPressG Flanges work with?
MegaPressG Flanges are designed for Schedule 10 through Schedule 40 carbon steel pipe. They are press-connection flanges built for carbon steel piping systems. Confirm the pipe schedule on the job before ordering.
What flange class is the standard MegaPressG flange?
The standard model 6659.5 MegaPressG flange is a Class 150 raised face flange. It is made in sizes from 1/2" to 2" with a 4-bolt pattern in every size. Match the class and face type to the mating flange before ordering.
What are the bolt pattern diameters on MegaPressG Flanges?
On the standard model 6659.5, bolt pattern diameters are 2-3/8" for 1/2", 2-3/4" for 3/4", 3-1/8" for 1", 3-1/2" for 1-1/4", 3-7/8" for 1-1/2", and 4-3/4" for 2". Every size uses 4 bolts. Compare the diameter against the mating flange before ordering.
What is different about the XL MegaPressG flanges?
The model 6659.5XL is a Class 125 flat face flange for 2-1/2", 3", and 4" pipe, with 4 bolts on the first two sizes and 8 bolts on the 4" size. MegaPressG XL flanges must be installed with MegaPress XL rings and a PressBooster/Z3 actuator. Part numbers are 28875, 28880, and 28885.
What seal and coating do MegaPressG Flanges use?
MegaPressG Flanges use an HNBR sealing element, along with a grip ring and a separator ring. The flanges are carbon steel with a zinc-nickel coating. The MegaPressG system also holds a UL180 listing under Cert. No. MH65252.