3/4" Filter/reg 30 psi

Reduce the amount of pressure from the water source and filter out particulates that can clog and damage emitters with the all-in-one pressure-regulating Y filter. This device is preset at 30 PSI and has a flow range from 0.2 to 5 GPM. The 200-mesh filter blocks particles and is removable for cleaning. The 3/4" MPT X 3/4" MPT device connects to pipe commonly used in underground valve systems. The pressure-regulating Y filter is made of ABS; filter screen is made of stainless steel. Drip irrigation waters plants efficiently, reducing water usage by up to 70% compared to conventional sprinkler irrigation. Drip irrigation systems are easy to install, operate, and maintain, and can easily be automated. With proper installation of a drip system, water is delivered precisely to where plants need it most, and plants get the hydration they need for optimal growth and overall health. NDS is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of professional landscapers since 1972. The company offers a wide selection of water management solutions engineered for performance, durability, and ease of installation. For more information and technical support, visit the NDS Pro website.

• Regulates water pressure from water source; preset at 30 PSI, ideal for most drip irrigation systems
• 200-mesh stainless steel filter screen blocks particles in the water from clogging emitters; filter is removable for cleaning and maintenance
• Filter can be flushed out by removing the flush cap and running water through; also can be removed from the middle housing to clean
• Made of heavy-duty plastic treated with UV inhibitors
• Ideal for most drip irrigation systems to regulate water pressure from water source and filter out particulates in water
• Lowers incoming water pressure from a water source and filters out particulates for optimal performance of your drip system
• Connects to a water supply line with a 3/4" FPT connection point
• Drip irrigation systems work with low water pressure, and the pressure-regulating filter lowers the water pressure from a water source while preventing particulates from clogging and potentially damaging emitters
• Attach to 3/4" FPT; use Teflon tape to make a watertight seal and tighten by hand; flow rate for line should not exceed 5 GPM [emitter flow rate (GPH) multiplied by # of emitters on line divided by 60 should be less than 5 GPM]
• Periodically check for leaks or damage and replace or repair as needed; filter can be flushed out by removing the flush cap and running water through or screen removed from housing to clean
• Pressure-regulating filter is made of high-impact Acrylonitrile Butadiene Styrene (ABS) treated with UV inhibitors to prevent cracking
• Filter screen is made of stainless steel