PVC Barbed Insert Plugs are rigid PVC fittings with a barbed insert end that seal the end of polyethylene pipe. Spears PVC insert fittings are made for use with ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe, and they meet or exceed ASTM D 2609, the standard specification for plastic insert fittings for polyethylene plastic pipe. The rigid PVC barbed inserts are chemical and corrosion resistant and grip polyethylene well. Spears also lists its insert fittings as NSF certified for use in potable water systems. SupplyHouse lists Spears 1449 series plugs in sizes from 1/2" to 2", plus 4" and 6" lay flat versions. Picking the plug that matches the pipe type and size matters because the barb is what holds the fitting in the polyethylene.
Subcategories
Buying Guide
Start with the pipe. Confirm that the line is polyethylene and identify the standard, since Spears insert fittings are made for ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe. Next, match the plug size to the pipe size. SupplyHouse lists Spears 1449 plugs from 1/2" to 2", and the 4" and 6" lay flat versions carry an LF suffix in the part number. Then confirm the application. Spears insert fittings are NSF certified for use in potable water systems, and they meet or exceed ASTM D 2609. When comparing PVC Barbed Insert Plugs, also look at the build. Rigid PVC barbed inserts are chemical and corrosion resistant and grip polyethylene well, so the barb does the holding work in the pipe. Check the pressure class of the pipe, since the plug is only one part of the assembly. Consider the install as well. Follow Spears guidance for the pipe size, and use clamps only where the manufacturer's instructions or local code call for them. Count plugs by size and add a few spares for pressure testing and field changes. Write the full Spears part number on the order, including any LF suffix, to prevent a size or style mix-up.
Frequently Asked Questions
What are PVC barbed insert plugs used for?
PVC barbed insert plugs seal the end of polyethylene pipe with a rigid PVC barbed insert. Spears makes its insert fittings for ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe. The barb grips the polyethylene.
Are PVC barbed insert plugs NSF certified?
Spears states that its PVC insert fittings are tested and certified by NSF International for use in potable water systems. The certification applies to the Spears insert fitting line, so confirm the marking on the specific plug.
What sizes do Spears PVC barbed insert plugs come in at SupplyHouse?
SupplyHouse lists Spears 1449 series PVC barbed insert plugs in 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2", plus 4" and 6" lay flat versions. Part numbers run from 1449-005 for the 1/2" plug to 1449-020 for the 2" plug. The lay flat versions are 1449-040LF and 1449-060LF.
What standard do PVC barbed insert plugs meet?
Spears insert fittings are made to meet or exceed ASTM D 2609, the standard specification for plastic insert fittings for polyethylene plastic pipe. They are intended for ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe. Confirm the pipe standard before choosing the plug size.
What does LF mean on a PVC barbed insert plug?
SupplyHouse lists the 4" and 6" Spears plugs as barbed lay flat insert plugs, with LF in the part numbers 1449-040LF and 1449-060LF. Spears supplies its larger insert fittings for lay-flat type irrigation hose. Confirm the lay flat style against the hose before ordering.