3 Porcelain Chrome Lever Handle Rebuild Kit, S10-3200

I replaced my 3-way shower American Standard valve with a Pfister which, for all intents and purposes, had the same dimensions except the valve for the hot water turned on in a clockwise motion. I had purchased ordinary knobs, but it was confusing. The lever handle knobs fit the bill. The handles are well built, heavy, and the vendor shipped it very fast (I received it within 2 days). Two things to note. First, the splash setup worked well for the hot and cold stems. However, the divertor stem threads were slight farther in the wall and I could not fix the splash flange against the wall. The splash center piece had a little nitch that would hold the flange to the wall but for the divertor stem was inside the wall. (I fixed this by adding to the splash stem pieces I had around). Second, the divertor valve only travel 120 degrees and it looked odd. If I had it at an angle other than north-south, the divertor handle could have interfered with one of the other stems. I fixed this by using a cross handle for the divertor.