ProPress 304 Stainless Steel Caps are Viega fittings for terminating a stainless line, with catalog sizes running from 1-1/4" to 3". The product records show an FKM seal and the Smart Connect feature on these caps. Product notes state the caps are approved for residential and low pressure steam, compressed air, fire protection and many fuel and oil applications. Product notes also say a licensed professional should install the item. The sampled caps in 1-1/4", 1-1/2" and 2" sizes are plain ProPress models, and the 2-1/2" and 3" caps are XL-S models. Contractors reach for a cap when a stainless run needs a clean termination, whether that's a stub for future work or the end of a branch. Matching size, seal and approved application before the order goes in keeps the crew from losing time to a wrong fitting on site.
Subcategories
Buying Guide
Start with line size, since that decides everything else. The sampled caps run from 1-1/4" to 3", and the 2-1/2" and 3" models are XL-S caps, so confirm the model name before ordering.
Next, check the seal. The sampled records list an FKM seal, and some notes say the photo depicts a cap with an EPDM seal. Read the product name for the seal type instead of trusting the image.
Then confirm the application. Product notes list approval for residential and low pressure steam, compressed air, fire protection and many fuel and oil applications. Check the actual service against that list, local code and the authority having jurisdiction before the order goes in.
Plan the labor too. Product notes say a licensed professional should install the item, so confirm who is handling the install before scheduling.
When comparing ProPress 304 Stainless Steel Caps, look for the Smart Connect feature in the product description for the exact size being ordered. Every sampled record mentions it, but the product page is the place to verify a specific size.
Finally, buy caps alongside the other stainless fittings for the same run so sizes, seals and approvals match throughout the job. A mismatch found on site costs a crew more time than a few extra minutes spent on the order.
Frequently Asked Questions
What sizes do ProPress 304 Stainless Steel Caps come in?
The catalog records show ProPress 304 Stainless Steel Caps in 1-1/4", 1-1/2", 2", 2-1/2" and 3" sizes. The 2-1/2" and 3" caps are XL-S models. Check the product page for the exact size needed.
What seal do ProPress 304 Stainless Steel Caps use?
The sampled ProPress 304 Stainless Steel Caps use an FKM seal. Some product notes say the image depicts a cap with an EPDM seal, so read the product name for the seal type.
What applications are the caps approved for?
Product notes say ProPress 304 Stainless Steel Caps are approved for residential and low pressure steam, compressed air, fire protection and many fuel and oil applications. Confirm the specific service and local code requirements before installing.
Who can install ProPress 304 Stainless Steel Caps?
Product notes say a licensed professional should install ProPress 304 Stainless Steel Caps. Contractors should arrange a licensed installer before the work starts.
Do ProPress 304 Stainless Steel Caps have the Smart Connect feature?
Every sampled ProPress 304 Stainless Steel Cap record describes the Smart Connect feature, including the XL-S caps in 2-1/2" and 3" sizes. Check the product page for the exact size before ordering.