Qwik System Flush 2 lb Aerosol Can

Qwik System Flush®, a patented formulation, is 5-10 times more effective in acid removal, moisture & oil absorption than competitive products.

Qwik? System Flush® is used to flush contaminants such as residual oil, acid, or moisture from refrigeration line sets. If you can't replace refrigeration line sets after a burnout or R-22 to R-410a change out then you should use Qwik System Flush to remove residual contamination.

The following equipment will be required for each flushing operation:

A 2 lb. aerosol can (QT1100) or a 1 lb. aerosol can (QT1130) of Qwik System Flush®.

One 2 lb. can will clean up to a 10-ton refrigeration system. One 1 lb. can will clean up to a 5-ton refrigeration system.

Compressed nitrogen cylinder with pressure regulator

An empty container to catch the waste oil and impurities as they exit the system

A can access valve, such as Mainstream part number QT1105 or equivalent

A tube access fitting, such as Mainstream part number QT1110 or a flare fitting that can be brazed onto a cut lineset.

Refrigerant charging hose with 1/4" flare terminations

Protective gloves and safety glasses