Taco Water Feeders are electronic water feeders that work with a low water cutoff to maintain safe water content in a boiler. The product records show a 24V model and a 120V model, both listed for steam boilers with a maximum vessel pressure of 25 psi. Installers can select the number of gallons fed, any delay before feeding, the hold after water is OK, and monitoring of excessive feeding. Taco describes the feeder as preventing the damaging effects and potential flooding caused by supplying excessive feed water, and it features an internal flood lockout reset button. Both models list a NEMA-1 enclosure and a 150 psi maximum pressure rating. Contractors on steam boiler jobs use them to automate boiler feed water. Selecting the correct voltage and confirming the boiler type keeps water level control matched to the system.
Subcategories
Buying Guide
Start with the voltage. Voltage is the first split between the two models listed. The product records list a 24V model and a 120V model, so match the feeder to the power supplied at the boiler. Confirm the supply voltage on the job before ordering.
Next, confirm the boiler type and pressure. Both feeders are listed for steam boilers, with a 25 psi maximum vessel pressure and a 150 psi maximum pressure rating. Compare those numbers with the system before ordering.
Then plan the control pairing. Taco states that the feeder works in conjunction with the Low Water Cutoff to maintain safe water content in the boiler. Verify the pairing with Taco before ordering.
When comparing Taco Water Feeders, review the operating settings. The installer can select the number of gallons fed, any delay before feeding, the hold after water is OK, and monitoring of excessive feeding. Selectable options let the feeder be tuned to the system, and the unit also features an internal flood lockout reset button.
Finally, check the enclosure and mounting needs. Both models list a NEMA-1 enclosure, so confirm that rating suits the location before ordering. Reading both product records together keeps the choice simple, since the listed models differ in voltage. A feeder that matches the supply, boiler type, and enclosure needs avoids returns and delays.
Frequently Asked Questions
What do Taco Water Feeders do?
Taco Water Feeders work in conjunction with the Low Water Cutoff to maintain safe water content in the boiler. The operating characteristics are selectable, including gallons fed, feed delay, hold after water is OK, and monitoring of excessive feeding. Taco describes the feeder as preventing flooding caused by supplying excessive feed water.
What voltages do Taco Water Feeders come in?
Taco Water Feeders in the product records come in 24V and 120V models. Both list steam boilers as the application. Confirm the supply voltage before choosing.
What boiler pressure can Taco Water Feeders handle?
Both Taco Water Feeders in the product records list a 25 psi maximum vessel pressure and a 150 psi maximum pressure rating. They are listed for steam boilers. Compare those values with the system before ordering.
Can Taco Water Feeders be adjusted for feed volume and timing?
Yes. Taco Water Feeders have fully selectable operating characteristics, so the installer can choose the number of gallons fed, any delay before feeding, and the hold after water is OK. The feeder also includes monitoring of excessive feeding.
What enclosure rating do Taco Water Feeders have?
Taco Water Feeders in the product records list a NEMA-1 enclosure. The rating applies to both the 24V and 120V models. Confirm it suits the mounting location.