HVAC Strap

Have you ever found yourself with no where to hang your heating, ventilation, and air conditioning (HVAC) manifold gauges, so you just threw them on the ground? That problem has been solved with the HVAC Strap. The HVAC Strap is a magnetic HVAC manifold gauge holder, so you don't have to "hassle with the hook." It is proudly made in the USA for HVAC technicians invented by an HVAC technician HVAC Strap - a magnetic manifold gauge holder - has finally solved a historic problem for air conditioning and refrigeration technicians: trying to hang a manifold gauge by its built-in hook. Invented by an HVAC technician for HVAC technicians, the new HVAC Strap is constructed from heavy-duty woven material, coated metal (to avoid scratching or damaging the finish of the HVAC unit), plus a powerful magnet. The HVAC Strap attaches quickly and easily to the manifold gauge, and its magnet allows the technician to hang the gauge almost anywhere - wherever it's easiest to be seen.

• Keep the Zippers Clean and Lubricated - Over time, dirt and grit will clog the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant
• Protect the Zippers From Sharp Objects and/or Excessive Heat - Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils
• Don't Overstuff the Bag - Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed... proceed with caution