WELL-X-TROL pump stand and space saver tanks are pre-pressurized well tanks built by Amtrol for water systems where floor space or pump placement is limited. A pump stand tank doubles as a mounting base for a submersible or jet pump, combining the pressure tank and pump support into one footprint, while a space saver tank uses a narrower, taller profile to fit tight mechanical rooms and closets. Both styles use a sealed diaphragm or bladder to separate the water chamber from a precharged air cushion, reducing pump cycling and extending pump life compared to a plain steel tank. Contractors specify these tanks on well water systems, boosted city water setups, and any installation where a standard-diameter tank will not clear a doorway or crawlspace opening. Correct precharge pressure, set to match the pump's cut-in setting, keeps the diaphragm working through its full stroke and prevents premature waterlogging.
Subcategories
Buying Guide
Choosing between a WELL-X-TROL pump stand tank and a space saver tank starts with the physical constraints of the install location rather than the water system's demand alone. Measure the available floor footprint, ceiling height, and doorway width first, since a tank that will not fit through the access point is not a usable option regardless of its capacity rating. For a submersible pump installation where floor space is scarce, a pump stand tank lets the tank and pump share one location instead of requiring separate mounting hardware. For narrow mechanical rooms or retrofit jobs replacing an older, bulkier tank, a space saver model trades tank diameter for height while keeping a comparable drawdown volume. Drawdown capacity, the amount of usable water the tank delivers between pump cycles, should be sized to the well pump's flow rate and the household's peak demand; an undersized tank causes the pump to short-cycle, which shortens motor life. WELL-X-TROL Pump Stand & Space Saver Tanks both rely on a correctly set air precharge, typically matched a few psi below the pump's cut-in pressure, to keep the internal diaphragm working through its full range. Confirm the tank's maximum working pressure against the system's actual operating pressure, and check the system connection thread size against existing piping before ordering, since retrofitting a different thread size adds an extra fitting to the job.
Frequently Asked Questions
What is the difference between a pump stand tank and a space saver tank?
A pump stand tank has a reinforced top designed to support a submersible or jet pump directly above it, combining the pump mount and pressure tank in one unit. A space saver tank is simply built taller and narrower than a standard tank to fit through tight doorways or closets, with no pump-mounting function built in.
How do I know what size tank my well system needs?
Tank size depends on the pump's flow rate in gallons per minute and the household's peak water demand, not just the number of fixtures in the building. A plumber or well contractor typically calculates required drawdown capacity from the pump's specifications before recommending a tank size.
Why does a well tank need a precharge of air?
The air precharge cushions the water chamber inside the tank, letting the tank store water under pressure without the pump running constantly. Setting the precharge correctly, usually a few psi below the pump's cut-in setting, keeps the internal diaphragm working through its intended range and prevents early failure.
Can a pump stand tank be installed without a pump mounted on top?
Yes, a pump stand tank can be plumbed and pressurized like any other well tank even if no pump sits on the mounting plate. The reinforced top is a feature for installations that need it, not a requirement for the tank to function.
What causes a well tank to become waterlogged?
Waterlogging happens when the internal diaphragm or bladder fails and the air precharge mixes with or is displaced by water, causing the pump to cycle rapidly. Replacing the tank or, on serviceable models, the internal bladder and air valve restores normal operation.