Wall Cabinet Exhaust Fans are axial fans in a cabinet housing that mounts in a wall opening to push air out of a building. The SupplyHouse listing features the Fantech 1WMC Series, with models sized at 24, 30, 36, 42, and 48 inches. Fantech describes the 1WMC line as built for quiet and aesthetic operation with powerful ventilation, and it positions the line for commercial, industrial, and residential settings where a streamlined appearance matters. Single phase versions appear in the 30 and 36 inch sizes, such as the 1WMC30E2 and 1WMC36F2, so electrical service is a real selection factor on this series. Contractors choose wall mounted exhaust when a space needs air moved out through a wall instead of a roof or ducted route. Matching fan size and motor supply to the job at the start keeps the install simple, prevents electrical rework, and protects the airflow the space depends on.
Subcategories
Buying Guide
Start with the airflow the space needs. Calculate required CFM from room volume and the target air changes per hour, then compare that figure with the rated airflow on the spec sheet for each 1WMC model. Picking by wall opening alone risks an undersized fan.
Next, match the electrical service. Single phase versions, such as the 1WMC30E2 and 1WMC36F2, are identified as 1 Phase in their product titles. Check the voltage and phase at the building before choosing a model number, and confirm the motor data on the product page of each fan being considered.
Then check the physical fit. Wall Cabinet Exhaust Fans need a wall opening sized to the cabinet, so pull the dimensions for the specific size and compare them with the existing opening. On replacement jobs, match the size and motor data from the old nameplate.
Consider where the fan will work. Fantech designs the 1WMC line for quiet and aesthetic operation, which matters in commercial and residential spaces. Exhaust also needs a path for replacement air, so account for makeup air openings in the plan. Review wiring, controls, and disconnect requirements against local code before ordering. Document the final fan size, model number, and motor data in the job file so replacements and service calls move faster.
Frequently Asked Questions
What sizes do wall cabinet exhaust fans come in?
The Fantech 1WMC Series wall cabinet exhaust fans on SupplyHouse are sized at 24, 30, 36, 42, and 48 inches. Model numbers include 1WMC24D2, 1WMC30FY, 1WMC36GY, 1WMC42GY, and 1WMC48HY. Pick the size based on required airflow and the wall opening.
Are there single phase wall cabinet exhaust fans in this category?
Yes. The 1WMC30E2 and the 1WMC36F2 are identified as 1 Phase models in their product titles. For any other wall cabinet exhaust fan, check the electrical data on its product page before ordering.
What is the Fantech 1WMC wall cabinet exhaust fan designed for?
Fantech describes the 1WMC wall ventilator line as built for quiet and aesthetic operation with powerful ventilation. The line is positioned for commercial, industrial, and residential settings. Confirm that the rated airflow fits the load before specifying a wall cabinet exhaust fan.
How do I size a wall cabinet exhaust fan for a job?
Sizing a wall cabinet exhaust fan starts with required CFM, which comes from room volume and the target air changes per hour. Compare that number with the rated airflow for each model, then confirm the cabinet fits the wall opening. Check voltage and phase last, since they limit which models work on site.
What should I match when replacing a wall cabinet exhaust fan?
When replacing a wall cabinet exhaust fan, match the fan size and the motor voltage and phase from the old nameplate. Compare the new cabinet dimensions with the existing wall opening. Confirm the details on the product page for the replacement model before ordering.