| Size: | 18" x 18" |
|---|---|
| Wall Opening (Inches): | 18-3/8" x 18-3/8" |
| Material: | Plastic |
| Type: | Walls or Ceilings |
| Number of Latches: | 1 |
| Latch: | Snap Latch |
Hi Lori! Yes, the door should be flush to the frame when closed.
My door was not hinged. It is simply a press in fit that is fairly tight.
Get Oakley#34056. Outer frame is 17 x17.
The manufacturer does not recommend using this door on the floor in areas with potential foot traffic.
Sadly I don't think it will be strong enough for continuous walking on.
This access door is definitely not going to hold up to foot traffic.
I don't think it is designed to be stepped on. And I doubt low foot traffic really matters. It would only have to be stepped on once the right way to break, so whether it takes a month or a year before that happens, what's the difference. Metal access doors are available and they are probably stronger, although I doubt they are designed to withstand foot traffic. Contact the manufacturer to find out. If you can't find any commercial access door strong enough, then make your own. It isn't too hard. You could make it out of plywood with a simple hinge. Cover the plywood door with the same finish as the rest of the floor.
That is the method to use, make sure you pry in the correct spot and use the thinest device you can find. Laurence
The doors are installed by applying caulking adhesive to the back of the frame and pressing into place. They come standard with a white finish, but can be painted to match the surrounding area.
Cut hole the size of door and it fit right into space, but we also fastened to wall with screws and drywall anchors(?). Product is lightweight and it worked great. It is paintable.
The rough opening is 12-3/8" x 12-3/8".
Instructions said 12 1/4" x 12 1/4"
The wall insert is 14" x 14" total.
Go to the spec sheet, the overall dimension is 15.75 inches, cutout is 14.25".