Apply to be a TradeMaster!
Filter menu expanded

Filters

5 items
Reset

SORT

Product Availability
–

Show In Stock Only (2)

Price Range
–

$100 to $200 (3)
$200 to $300 (1)
$300 to $400 (1)

Armstrong Air Blower Wheels

Help Face
Need a little help?
5 items
Grid
List
Compare
Product Image of Blower Wheel Replacement, R34833B001
$229.09 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Compare
Product Image of Blower Housing And Wheel, R76727800
$151.89 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of Blower Wheel, R01254A002
Blower Wheel, R01254A002
SKU: R01254A002
Armstrong Air
SKU: R01254A002
$135.99 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Compare
Product Image of Blower Shaft, R41111-001
Blower Shaft, R41111-001
SKU: R41111-001
Armstrong Air
SKU: R41111-001
$146.73 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Compare
Product Image of Blower Housing Replacement, R25908C010
Blower Housing Replacement, R25908C010
SKU: R25908C010
Armstrong Air
SKU: R25908C010
$329.95 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Resources
FAQs, Manuals & Videos
Articles
More About Armstrong Air Blower Wheels

Armstrong Air Blower Wheels are replacement squirrel-cage blower wheels used in Armstrong Air furnaces and air handlers to move conditioned air through the ductwork. HVAC technicians replace a blower wheel when it becomes unbalanced, cracked, or corroded, since a damaged wheel creates vibration and noise that can eventually damage the blower motor bearing. Matching the replacement wheel to the exact model number of the original equipment matters more than matching by furnace tonnage alone, since wheel diameter, width, and bore size vary across the Armstrong Air furnace lineup. A wheel that spins out of balance, even slightly, shortens motor life and increases the chance of a repeat service call. Pulling the original wheel's part number off the unit before ordering keeps the replacement fit correct on the first attempt.

Subcategories

  • Direct Drive Blower Wheels: Direct drive blower wheels mount straight onto the motor shaft without a belt and pulley system, which is the configuration used on most modern Armstrong Air furnaces and air handlers. Technicians confirm bore size and set screw configuration match the motor shaft exactly before installing a replacement. A wheel that does not seat correctly on the shaft will run out of balance no matter how new the part is.
  • Belt Drive Blower Wheels: Belt drive blower wheels are used on older or larger Armstrong Air equipment where the blower is driven through a belt and pulley rather than mounted directly to the motor. Technicians servicing this configuration check pulley alignment and belt tension at the same time as replacing the wheel, since a wheel replacement alone will not fix a vibration problem caused by belt or pulley wear. Bore size and wheel width still need to match the original equipment specification.
  • Blower Housing Assemblies: Blower housing assemblies pair a replacement wheel with the surrounding housing, useful when the housing itself is damaged or corroded along with the wheel. Ordering the assembly as a set saves a technician from fitting a new wheel into an old housing that may no longer hold proper clearance around the wheel. Matching the assembly to the specific furnace model keeps airflow performance consistent with the original equipment.
  • Buying Guide

    Selecting a replacement blower wheel starts with confirming the exact model and serial number of the Armstrong Air furnace or air handler rather than guessing from the unit's general size or tonnage. Wheel diameter, width, and bore configuration vary enough across the lineup that a wheel pulled for a similar-looking unit can still be the wrong fit, even when the overall furnace size is close.

    Technicians sourcing Armstrong Air Blower Wheels should also check whether the original equipment uses a direct drive or belt drive configuration, since the two wheel types are not interchangeable and require different mounting hardware. Direct drive wheels mount straight to the motor shaft, so bore size and set screw alignment need to match precisely, while belt drive systems depend on correct pulley alignment and belt tension working together with the wheel itself.

    Inspecting the blower housing at the same time as the wheel is worth doing before finishing the job, since a housing with corrosion or physical damage can throw off wheel clearance even after a correctly sized wheel is installed. In cases where the housing shows wear alongside the wheel, ordering a full housing assembly instead of a standalone wheel avoids a second service call later. Checking wheel balance after installation, before buttoning up the unit, confirms the replacement is seated and functioning correctly.

    Frequently Asked Questions

    How do I identify the correct replacement blower wheel for my Armstrong Air unit?

    Pulling the model and serial number directly off the furnace or air handler nameplate is the most reliable way to identify the correct wheel. Wheel diameter, width, and bore size vary enough across the lineup that matching by tonnage alone can lead to an incorrect fit.

    What causes a blower wheel to go out of balance?

    Cracks, corrosion, or a buildup of dust and debris on the wheel blades are the most common causes of an out-of-balance wheel. Once a wheel is out of balance, the resulting vibration can shorten the life of the blower motor bearing.

    Are direct drive and belt drive blower wheels interchangeable?

    Direct drive wheels mount straight to the motor shaft while belt drive wheels are part of a pulley and belt system, so the two are not interchangeable. Installing the wrong type will not fit the equipment correctly regardless of similar overall dimensions.

    When does a blower housing need to be replaced along with the wheel?

    A housing with visible corrosion or physical damage should be replaced along with the wheel, since housing wear can affect wheel clearance even after installing a correctly sized replacement. Ordering a full assembly in that situation is more reliable than fitting a new wheel into a damaged housing.

    What should be checked after installing a new blower wheel?

    Confirming the wheel is seated correctly and spins without wobble or unusual noise before closing up the unit helps catch a fit problem early. Checking amp draw on the motor after installation is also a good practice to confirm the wheel and motor are working together correctly.

Didn't find what you're looking for? 
Let us know
.