Armstrong Air conversion kits let technicians adapt an Armstrong Air furnace to run on a different fuel type or orientation than it shipped with, most commonly switching between natural gas and propane. Each kit swaps out the orifices, and in many cases the gas valve regulator spring or a control component, so combustion is tuned correctly for the replacement fuel rather than running rich or lean on a setup it wasn't built for.
Technicians reach for these kits on two common jobs: converting a furnace after a home moves from natural gas service to a propane tank, or installing a furnace in a location where the fuel type available differs from what the unit shipped configured for out of the factory. Using the manufacturer's specific kit for the exact furnace model matters because orifice sizing and regulator settings vary across the Armstrong Air lineup, and a mismatched kit leads to a combustion problem that a universal or generic part won't solve.
Subcategories
Buying Guide
Start by identifying the exact Armstrong Air furnace model and serial number before selecting a conversion kit. Orifice sizing and regulator specifications are matched to specific furnace models, and a kit built for one model can leave another running an incorrect air-to-fuel mixture even if both units look similar on the outside.
Confirm the direction of the conversion needed, natural gas to propane or propane to natural gas, since kits are not interchangeable between directions. A kit designed to convert a unit to propane contains different orifice sizes and regulator settings than one designed to convert the same unit to natural gas.
Check the installation elevation against the furnace's manual before finalizing the order. Installations above the elevation threshold specified by the manufacturer typically require an additional high altitude adjustment on top of the standard fuel conversion, and skipping that step affects combustion quality even when the fuel-type conversion itself is done correctly.
Verify whether the kit includes everything needed for a complete conversion, such as updated rating plate labels documenting the change, or whether some components need to be ordered separately. A conversion that isn't fully documented on the furnace's rating plate can create confusion for the next technician who services the unit.
Any gas furnace conversion should be performed by a qualified technician following the specific instructions included with the kit and the furnace's installation manual, since incorrect combustion settings on a gas appliance create a real safety risk.
Frequently Asked Questions
Can any Armstrong Air furnace be converted from natural gas to propane?
Most Armstrong Air gas furnaces support conversion, but the correct kit has to match the specific model and serial number. Checking the furnace's installation manual or rating plate confirms whether a conversion kit is available for that model.
What does an Armstrong Air conversion kit typically include?
A standard kit includes replacement burner orifices sized for the target fuel and, in many cases, a regulator spring for the gas valve to adjust manifold pressure. Some kits also include an updated rating plate label to document the conversion for future service calls.
Is a high altitude kit different from a fuel conversion kit?
Yes, a high altitude kit adjusts orifice sizing for reduced air density at elevation, which is a separate issue from switching between natural gas and propane. Installations above the elevation threshold in the furnace manual may need both a fuel conversion and a high altitude adjustment.
Can a homeowner install a gas conversion kit themselves?
Gas furnace conversions involve adjusting combustion settings on a gas appliance and should be performed by a qualified, licensed technician following the manufacturer's instructions. Incorrect installation creates a combustion and safety risk.
How do I know if my furnace has already been converted?
A properly completed conversion should include an updated rating plate label on the furnace documenting the fuel type and conversion kit used. If no label is present, a technician can verify the current orifice sizing against the furnace's original specifications to confirm its fuel configuration.