Black 90° Reducing Elbows (Imported) are Bluefin fittings that turn a line 90 degrees while stepping between two different sizes. The sizes sampled here are 3/4-inch by 1/2-inch, 1-1/4-inch by 1/2-inch, 1-1/2-inch by 1/2-inch, 2-inch by 1/2-inch, and 2-inch by 1-1/4-inch. Each product specification lists the 90 degree angle along with the size pairing. Some product notes state that appearance may vary slightly, and that minor visual differences, including color, do not change function or performance. Trade pros reach for a reducing elbow when a layout calls for a turn and a size change in one fitting, which can reduce the joint count compared with a standard elbow plus a separate reducer. Correct sizing matters because both ends of the fitting must match the pipe they join, and a wrong pairing means a return trip.
Subcategories
Buying Guide
Start with the two sizes. A reducing elbow is specified by its larger and smaller connection, so list both before ordering. The sizes sampled here pair a 1/2-inch connection with 3/4-inch, 1-1/4-inch, 1-1/2-inch, or 2-inch, and a 2-inch by 1-1/4-inch option also appears.
Verify the pipe on each end. The product records give sizes and a 90 degree angle, but they do not state end connection type, material grade, or pressure rating. Confirm those on the product page or with the manufacturer before the fitting goes on a job, especially where the system type sets requirements.
Next, think about layout. When comparing Black 90° Reducing Elbows (Imported), count the joints in the planned run. A single reducing elbow handles a turn and a size change together, while a standard elbow plus a reducer needs more joints.
Finally, plan for appearance variation. Some product notes state that appearance may vary slightly and that minor visual differences, including color, do not change function or performance. Where finish matters on an exposed run, set expectations with the customer early. Order by exact size pair and keep that description on the work order to avoid mismatches. Even with a known brand like Bluefin, check each fitting size against the actual pipe before installation. Keep the larger and smaller sizes in the same order on every document.
Frequently Asked Questions
What sizes do black 90 degree reducing elbows come in?
The Bluefin black 90 degree reducing elbows sampled here come in 3/4-inch by 1/2-inch, 1-1/4-inch by 1/2-inch, 1-1/2-inch by 1/2-inch, 2-inch by 1/2-inch, and 2-inch by 1-1/4-inch. Confirm the size pairing on the product page before ordering.
Are these black reducing elbows a true 90 degree fitting?
Yes. The product specifications for the Bluefin black 90 degree reducing elbows list an angle of 90 deg. Each one turns a line 90 degrees while changing size.
What is the difference between the 2-inch by 1/2-inch and 2-inch by 1-1/4-inch elbows?
Both black 90 degree reducing elbows have a 2-inch connection. The smaller connection is 1/2-inch on one and 1-1/4-inch on the other. Pick the elbow whose smaller size matches the pipe it will join.
Do black 90 degree reducing elbows list end connection or pressure rating?
The product records for these Bluefin black 90 degree reducing elbows list size and angle but not end connection type or pressure rating. Check the product page or manufacturer documentation before installation.
Will black 90 degree reducing elbows look exactly like the product photos?
Some product notes for these Bluefin black 90 degree reducing elbows say appearance may vary slightly. Minor visual differences, including color, do not change function or performance.