'/%3E%3C/svg%3E)
 --%3E %3Csvg version='1.1' id='Fill' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cpath fill='%23F15C02' d='M79.44,0.95H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,10.79,8.82,19.61,19.61,19.61h58.87 c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,9.78,90.22,0.95,79.44,0.95z M65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82 l9.34-29.6L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1H91.2L65.38,58.24z'/%3E %3C/svg%3E){kind=small}
MANUALS (2)
Product Highlights
Specs
| Material: | Brass |
|---|---|
| Size: | 1/2" |
| Connection Type: | FNPT x FNPT |
| Connection Method: | Threaded |
| Pressure Rating: | 250 psi |
| Thread Type: | Female |
| Handle Style: | Lever |
| Lead Free: | Yes |
| Brass Alloy: | C46500 |
Questions?
Compare Similar Products
You May Also Need
Product Reviews
Most Liked Positive Review
Why is hydrovalve products being phased out
Most Liked Negative Review
 --%3E %3Csvg version='1.1' id='With-RB' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cpath fill='%23FBC8B4' d='M79.44,0.95H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,10.79,8.82,19.61,19.61,19.61h58.87 c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,9.78,90.22,0.95,79.44,0.95z M65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82 l9.34-29.6L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1H91.2L65.38,58.24z'/%3E %3C/svg%3E){kind=small}
Not What I Expected
Great quality at a great price
Great product
Good quality
Great valve
We buy these often
Quality
Great job
I would by this product again.
Well made and inexpensive
I would buy again
Product Q&A
6 QuestionsQ: Are these gas valves considered "full port"?
Asked by derrrrrrrrrrrrick 4 years ago
Add your answer
Verified Reply- SupplyHouseHi Derrick! No this model would not be considered full port.
Q: is this valve suitable for outdoor installation, exposed to weather for standby generator
Asked by bob 10 years ago
Add your answer
Verified Reply- SupplyHouse StaffYes, the gas ball valve may be used in an exposed outdoor installation.
Q: Can this valve be used on natural, manufactured, mixed, and liquefied gasses? Handle says for LP-Gas.
Asked by Anonymous 11 years ago
Add your answer
Verified Reply- Supplyhouse StaffThe 1/2' Gas Ball Valve is intended for use with natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures.
Q: Is this AGA approved?
Asked by Patty Mayonaisse 14 years ago
Add your answer
Verified Reply- PexSupply StaffNo, but it is CSA and UL certified.
Hard to uncover, as Hydrovalve is a branding, probably Far East, not a manufacturer. However, It has right on it a CSA c us mark. That should do it. The local gas supply company installers & county inspector had no issues with them in my installation. From the CSA website: http://www.csa-international.org/certification_marks/ "CSA International has the #1 Marks in Canada and the only Mark You Need for the U.S." Joe
I looked up the AGA approval list and I didn't see this manufacturer listed..
It is CSA Canadian Standards Association... I don't recall the AGA American Gas Association Seal on it. Check with local inspector to see if it would be accepted..
Yes, it also is 600 wog instead of 300 like alot of them. Thank You, Sky Feaster, Master Plumber A Pipe Surgeon, Inc
Q: Which end of the valve goes 'upstream'? Upstream meaning pressure side.
Asked by BigDog 14 years ago
Add your answer
These valves are NOT serviceable and can be installed either way, the knob can be rotated if needed. There is a seam, but the valve will not separate. Hope this helps.... That is why the flow is not indicated on the valve as you can use it either way.
The valve will operate quite satisfactorily either way. The left side as pictured has one less joint & thus one less opportunity for leaking, but the assembly joint that is on the right side is not going to leak either, so it makes no difference. Joe
It does not matter. These valves do not have an upside or downside. You can install them whichever way is most convenient for you to move the cutoff handle.
The side with the numbers on it is the pressure side - I checked two of my valves installed by the gas man. Mike
Q: Can this valve also be used for hot and cold water applications? Thank you
Asked by 14 years ago
Add your answer
The 1/2' Gas Ball Valve is intended for use with natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures. It is not intended for hot or cold water applications.