Feeding Equipment is the hardware used to add treatment chemicals to closed hydronic systems and boilers. The category includes by-pass feeders such as the Nu-Calgon 20L Feeder, a steel tank suitable for pressures to 150 psi and temperatures to 212 degrees F, and the Axiom Chemical By-Pass Feeder with Wall Bracket, which lists a maximum temperature of 200 degrees F. Both models list 3/4-inch connections. Nu-Calgon describes its feeder for by-pass feeding of chemicals into closed systems and boilers, and Axiom describes its feeder as delivering chemicals to any closed loop system. Contractors compare pressure rating, temperature rating, and connection size before choosing a unit. Getting those specs right matters because a feeder has to match the system pressure, the system temperature, and the piping it serves.
Subcategories
Buying Guide
Start with the system type and the operating limits. The feeders listed here are described for chemical delivery to closed systems, closed loops, and boilers. The Nu-Calgon 20L Feeder is suitable for pressures to 150 psi and temperatures to 212 degrees F, and the Axiom Chemical By-Pass Feeder with Wall Bracket lists a maximum temperature of 200 degrees F. Compare those numbers with the system before ordering.
Next, match the connection and charge size when comparing Feeding Equipment. The Nu-Calgon 20L Feeder uses 3/4-inch FNPT connections for installing on a by-pass to any size line, and the Axiom feeder lists a 3/4-inch connection size. For initial charge, Nu-Calgon lists the No. 20L Feeder for charges to 20 pounds and the No. 100L Feeder for charges to 100 pounds. Axiom lists 2 gallon and 5 gallon models.
Consider the dosing features. Axiom's feeder has ball valves for chemical dosing and pot feeder isolation, plus a graduated funnel with a stainless steel filter for clean, accurate, mess free chemical addition. Axiom makes the pressure vessel and fittings from brass and carbon steel, while Nu-Calgon lists steel tanks for its feeder.
Finally, read the manufacturer instructions for installation and chemical use. Match the feeder to the system pressure, temperature, connection size, and charge before ordering.
Frequently Asked Questions
What pressure and temperature can the Nu-Calgon 20L feeder handle?
The Nu-Calgon 20L Feeder is a steel tank suitable for pressures to 150 psi and temperatures to 212 degrees F. Feeding equipment in this category varies by model, so check the rating on each unit before installing.
What size connections do these chemical feeders use?
The Nu-Calgon 20L Feeder uses 3/4-inch FNPT connections for installing on a by-pass to any size line. The Axiom Chemical By-Pass Feeder lists a 3/4-inch connection size. Check the connection on any other feeding equipment before ordering.
How much chemical can the Nu-Calgon feeders take?
Nu-Calgon describes the No. 20L Feeder for initial charges to 20 pounds and the No. 100L Feeder for initial charges to 100 pounds. Feeding equipment from Axiom is listed in 2 gallon and 5 gallon models. Size the feeder to the treatment plan for the system.
Can I dose a closed loop with a by-pass feeder?
Axiom describes its Chemical By-Pass Feeder as delivering chemicals to any closed loop system. Nu-Calgon describes its feeder for by-pass feeding of chemicals into closed systems and boilers. Confirm chemical and system compatibility with the manufacturer before dosing.
What dosing features does the Axiom feeder have?
The Axiom Chemical By-Pass Feeder has ball valves for chemical dosing and pot feeder isolation. It also has a graduated funnel with a stainless steel filter, and its pressure vessel and fittings are made with brass and carbon steel. Axiom lists a maximum temperature of 200 degrees F for the feeder.