Copper DWV 90° Street Elbows are drain, waste, and vent fittings that turn a copper run through 90 degrees. The Nibco 1-1/2" DWV FTGxC Street 90-Degree Elbow, for example, features a solder cup and a male solder end, and it is made of copper with a sweat connection. Elkhart and Nibco street elbows appear in this category in sizes that include 1-1/4", 1-1/2", and 3". A street style fitting carries a male end, so it can seat straight into the cup of the next fitting without a separate coupling between them. Installers use these elbows to change a pipe run in tight framing and in repair work where space is short. Matching the size and brand to the existing run keeps soldered joints consistent from rough-in through inspection.
Subcategories
Buying Guide
Start with pipe size, because a street elbow only works when it matches the run. The fittings in this category include 1-1/4", 1-1/2", and 3" sizes, so confirm the nominal size on the existing pipe or the plans before picking a fitting. Measure twice, since a fitting that is one size off cannot be fixed with extra solder.
Next, check the connection style. The Nibco street elbows in the catalog feature a solder cup and a male solder end with a sweat connection, so the joint is soldered rather than threaded or glued. Plan the order of joints so the male end seats into a cup before heat goes on.
Then look at brand and documentation. Elkhart and Nibco both appear among Copper DWV 90° Street Elbows. Nibco points installers to its technical data sheets and catalogs for engineering and installation information, and it makes its copper fittings in an ISO 9001 certified facility. Pull those documents when a spec review or inspection calls for them.
Last, think about the whole assembly. A street elbow makes a compact 90 degree turn, but soldering still takes clearance for a torch and a heat shield. Count the joints in the run, size every fitting to the pipe it joins, and keep the layout simple so the inspector can follow it.
Frequently Asked Questions
What connection do Nibco copper DWV street elbows use?
Nibco's 1-1/4" and 1-1/2" Copper DWV 90° Street Elbows are copper fittings with a sweat connection. Each one has a solder cup and a male solder end. The joints are made by soldering.
Which sizes show up in copper DWV 90 degree street elbows?
Copper DWV 90° Street Elbows in this category include 1-1/4", 1-1/2", and 3" sizes. Elkhart makes all three, and Nibco makes the 1-1/4" and 1-1/2" sizes. Confirm the exact size on the product page before ordering.
How does a copper DWV street elbow connect to the next fitting?
Copper DWV 90° Street Elbows from Nibco feature a solder cup and a male solder end. The male end seats into the cup of the next fitting, and the joint is soldered. The result is a compact assembly with no separate coupling needed.
Can I use a copper DWV street elbow on a pressurized supply line?
Copper DWV 90° Street Elbows are drain, waste, and vent fittings by design, and the product details reviewed here list no pressure rating. For pressurized supply work, confirm the fitting's rating on the manufacturer data sheet first.
Where do I find installation info for Nibco copper DWV street elbows?
Nibco directs installers to its technical data sheets and catalogs for engineering and installation information on its Copper DWV 90° Street Elbows. Nibco also makes its copper fittings in an ISO 9001 certified facility. Check the data sheet for the exact model before rough-in.