Copper DWV Couplings are solder-cup fittings that join two lengths of copper drain, waste, and vent tube. The NIBCO 901 coupling, for example, is wrought copper with C x C solder cups and an internal stop, and it is made in sizes from 1-1/4 inch to 4 inch. Elkhart Products also makes a wrot DWV coupling with stop, model 301R, for industrial and residential piping. Contractors use these couplings to extend a drain run, close a repaired section, or join tube lengths cut on site. NIBCO backs its copper fittings with a 50-year limited warranty. Picking the right size and stop style before soldering matters, since the stop sets how far each tube seats and a wrong choice means cutting the joint out and starting over.
Subcategories
Buying Guide
Start with the tube size. The NIBCO 901 comes in 1-1/4, 1-1/2, 2, 3, and 4 inch straight sizes, plus 1-1/2 by 1-1/4 inch and 2 by 1-1/2 inch reducing versions. Match the coupling to the nominal size of the DWV tube being joined and confirm the size on the fitting before soldering.
Next, decide between stop and no stop. A coupling with stop, like the NIBCO 901 or the Elkhart 301R, seats each tube to a consistent depth, which suits new construction where tube is cut to length. A no stop repair coupling, like the NIBCO 901-RP in 1-1/2, 2, 3, and 4 inch sizes, is the choice when closing a gap in an existing line.
Then confirm the connection type. For Copper DWV Couplings, both lines covered here use C x C solder cups, so the work calls for soldered joints on copper tube.
Also check manufacturer details. NIBCO makes its copper fittings in an ISO 9001 certified facility and backs them with a 50-year limited warranty. Elkhart's 301R is listed for industrial and residential use. Finally, count the joints on the job and order a few extra of the most common size, since a failed joint on a drain line often means cutting out the fitting and starting over.
Frequently Asked Questions
What is the difference between a copper DWV coupling with stop and without stop?
A copper DWV coupling with stop has an internal stop that controls how far tube enters the solder cup, as on the NIBCO 901. A no stop coupling, like the NIBCO 901-RP repair coupling, has none and is used to connect or repair two lengths of tube. The choice usually comes down to new work versus a repair.
What sizes do NIBCO copper DWV couplings come in?
The NIBCO 901 coupling with stop comes in 1-1/4, 1-1/2, 2, 3, and 4 inch sizes, plus 1-1/2 by 1-1/4 inch and 2 by 1-1/2 inch reducing versions. The 901-RP repair coupling comes in 1-1/2, 2, 3, and 4 inch sizes. Copper DWV couplings from other brands list their own size ranges.
Are copper DWV couplings soldered or press-fit?
The NIBCO 901 and 901-RP copper DWV couplings use C x C solder cups, and the Elkhart 301R is a solder-type C x C coupling. Copper DWV couplings of this type are joined by soldering copper tube into the cups. The connection type should be checked on the listing before ordering.
Do copper DWV couplings come with a warranty?
NIBCO backs its copper fittings, including the 901 DWV coupling, with a 50-year limited warranty. Copper DWV couplings from other manufacturers carry their own terms. The manufacturer's warranty documentation should be checked for the exact brand.
Can copper DWV couplings be used in residential and commercial work?
The Elkhart 301R is listed for industrial and residential applications, and the NIBCO 901 is used in copper tube DWV piping systems. Copper DWV couplings extend or repair drain, waste, and vent lines. Local code requirements should be confirmed for the specific job.