Copper Fitting End Plugs are fittings used to plug the end of a copper fitting, and they're also known as copper plugs or copper caps. The Elkhart line includes 1/2 inch, 3/4 inch, and 1 inch sizes, with part numbers 32022, 32026, and 32028, respectively. Plumbers and HVAC technicians use them to close the end of a copper fitting on repair and new construction jobs. The Elkhart 32022 1/2 inch plug replaced the earlier part number WP16-08, so older job records may reference either number. Size is the main selection spec on a plug, so matching it to the fitting being closed is the step that keeps the repair sound and the schedule on track, which is why it deserves a quick check before every order.
Subcategories
Buying Guide
Start with the fitting size. A copper fitting end plug closes the end of a copper fitting, so the plug has to match the size of the fitting it will close. The Elkhart range includes 1/2 inch (32022), 3/4 inch (32026), and 1 inch (32028) sizes. Read the size from the fitting or the pipe run before ordering, because a near size will not make a sound joint.
Next, check part number history. Elkhart 32022 replaced WP16-08 for the 1/2 inch size, so older purchase records and job notes may use either number. Confirm the current number on the product page before reordering.
When comparing Copper Fitting End Plugs, think about how many the job needs. A single repair may call for one plug, while a rough-in with several open stubs may need several in the same size. Counting the open ends in the drawings or on site before ordering prevents a short count.
Finally, confirm the plug suits the system. The correct choice depends on the fitting type, the joining method, and local code. Check the product page and the project specs, and follow the manufacturer's instructions and local code for installation. A few spare plugs in the sizes used on the job can prevent an extra trip when a field change adds an open end.
Frequently Asked Questions
What is a copper fitting end plug used for?
A copper fitting end plug is used to plug the end of a copper fitting. Copper Fitting End Plugs are also called copper plugs or copper caps. Plumbers and HVAC technicians use them to close an open fitting end.
What sizes do copper fitting end plugs include?
The Elkhart Copper Fitting End Plugs include 1/2 inch (32022), 3/4 inch (32026), and 1 inch (32028). Pick the size that matches the fitting being closed. Check the product page for the exact size and part number before ordering.
Did the Elkhart 32022 replace another part number?
Yes. The Elkhart 32022 1/2 inch copper fitting end plug replaced previous part number WP16-08. Older records for copper fitting end plugs in the 1/2 inch size may show either number.
Are copper caps and copper end plugs the same thing?
Copper plugs are also known as copper caps, and both terms describe a part used to plug the end of a copper fitting. Copper Fitting End Plugs are chosen by size, so match the part to the fitting. Confirm the size and part number on the product page.
How do I pick the correct size copper fitting end plug?
Match the plug to the size of the copper fitting being closed, such as 1/2 inch for 32022, 3/4 inch for 32026, or 1 inch for 32028. Copper Fitting End Plugs are size specific, so a near size will not seat properly. Check the fitting before ordering.