Eemax Series Three Electric Tankless Heaters are wall-mountable, thermostatic electric water heaters made for residential and commercial multi-fixture hot water demand. The line splits by heating design: T2T models reach a maximum of 4.0 GPM with staged heating modules, while T3 models reach 5.0 GPM with parallel heating modules and are for commercial use only. Eemax says the compact design can be as much as 90% smaller than a tank-style heater, and the thermostatic control adjusts heating power based on incoming water temperature. Applications include sanitation work as well as multi-fixture residential and commercial jobs. Choosing between T2T and T3 early sets the flow capacity and the commercial limits of the install, so it's the first decision on any spec, and it keeps the heater matched to the fixtures it serves.
Subcategories
Buying Guide
Start with the flow requirement. Count the fixtures that can run at the same time and compare that demand to the maximum flow of each model family. T2T models reach 4.0 GPM with staged heating modules, and T3 models reach 5.0 GPM with parallel heating modules.
Next, settle residential versus commercial. Eemax lists T3 models as commercial use only, while the line as a whole targets residential and commercial multi-fixture work. Pick the family that matches the building type before comparing sizes.
Eemax Series Three Electric Tankless Heaters are wall-mountable with thermostatic control that adjusts heating power based on incoming water temperature. Plan the location around the compact footprint, since Eemax says the design can be as much as 90% smaller than a tank-style heater. Confirm installation clearances in the Eemax installation guide before roughing in.
Finish with the electrical and plumbing details. Pull the Eemax specification sheet for the exact model to confirm kilowatt rating, voltage, and pressure rating, then size the electrical supply to match. Verify the incoming water temperature and the required outlet temperature for the application. A heater sized short of the demand will struggle to hold temperature at full flow. Document the model suffix in the submittal so the T2T or T3 choice carries through to the order.
Frequently Asked Questions
What is the maximum flow of Eemax Series Three T2T heaters?
Eemax Series Three T2T models reach a maximum of 4.0 GPM using staged heating modules. T3 models reach 5.0 GPM using parallel heating modules. Confirm the exact model on the Eemax specification sheet before specifying.
Can Eemax Series Three T3 heaters go in a house?
Eemax lists T3 models as commercial use only. The Series Three line is listed for residential and commercial multi-fixture applications overall, so confirm the model suffix before specifying a heater for a home.
How do Eemax Series Three heaters control temperature?
Eemax Series Three Electric Tankless Heaters use thermostatic control that adjusts heating power based on incoming water temperature. Eemax describes the control as maintaining stable output.
How big are Eemax Series Three heaters compared to a tank?
Eemax says the Series Three compact design can be as much as 90% smaller than a tank-style heater. The heaters also have a wall-mounted installation option. Check the installation guide for clearances.
Where do contractors find kW and voltage for Eemax Series Three?
Eemax Series Three Electric Tankless Heaters point to an installation guide and a specification sheet for complete specs. Pull those documents for the exact model before sizing the circuit.