Emerson 222CB Series Industrial Solenoid Valves are 2-way, normally closed solenoid valves from Emerson Flow Controls. The models in the listing use threaded connections and include 1/2 inch, 3/4 inch and 1 inch sizes. Flow capacity is stated as a Cv rating on the listed models, such as 3.5 Cv on the 1/2 inch Buna-N valve, 7 Cv on the 3/4 inch valves and 13 Cv on the 1 inch Buna-N valve. Sealing material also varies, with Buna-N on some models and a Rulon version that uses ethylene propylene gaskets. The 1 inch Buna-N model is listed with a 5 PSI differential. Because Cv, connection size and elastomer all change from model to model, reading the spec line before ordering is what keeps a replacement or a new install from turning into a mismatch on the job.
Subcategories
Buying Guide
Start with connection size and type. The valves in the listing have threaded connections in 1/2 inch, 3/4 inch and 1 inch sizes, so match the size to the piping before looking at anything else. Next, check flow capacity with the Cv rating. The 1/2 inch Buna-N valve lists 3.5 Cv, the 3/4 inch valves list 7 Cv and the 1 inch Buna-N valve lists 13 Cv. Size from the flow requirement and not from the line size alone.
Confirm the valve function. The models shown in the listing are 2-way, normally closed solenoid valves, so check that the application calls for that body pattern and function before ordering. Then check the sealing material. Buna-N is listed on the 1/2 inch and 1 inch valves, and the Rulon 3/4 inch valve is listed with ethylene propylene gaskets. Match the elastomer to the requirements of the system and the manufacturer's documentation.
Finally, compare the pressure differential. The 1 inch Buna-N valve is listed with a 5 PSI differential, so compare that figure with the system before choosing it. When comparing Emerson 222CB Series Industrial Solenoid Valves, read the full model name, since connection size, Cv and, where listed, elastomer and differential appear there. Pick the model that matches the existing valve or the design specs, and verify the details with the manufacturer's documentation when replacing a valve in an existing system.
Frequently Asked Questions
What body pattern do the Emerson 222CB solenoid valves use?
The Emerson 222CB Series Industrial Solenoid Valves shown in the listing are 2-way, normally closed solenoid valves with threaded connections. Check that function against the application before ordering. Emerson Flow Controls is the brand listed on these models.
What sizes and Cv ratings do these valves come in?
The Emerson 222CB solenoid valves in the listing include a 1/2 inch model at 3.5 Cv, 3/4 inch models at 7 Cv and a 1 inch model at 13 Cv. Cv varies by model, so check the spec line on the exact valve.
What's the difference between the Buna-N and Rulon valves?
The difference is the sealing material listed for the model. The 1/2 inch and 1 inch Emerson solenoid valves are Buna-N, while the 3/4 inch Rulon valve is listed with ethylene propylene gaskets. Confirm which elastomer fits the application before ordering.
Do these valves list a pressure differential?
The 1 inch Buna-N valve in the Emerson 222CB Series Industrial Solenoid Valves listing is shown with a 5 PSI differential and a 13 Cv rating. Other models may not state a differential in the name, so check the product record for each valve.
What connection type do the 222CB solenoid valves use?
The Emerson 222CB solenoid valves shown in the listing use threaded connections. Confirm the connection type on the exact model before ordering, and match it to the piping on the job.