Complete Replacement System for Gerber 28-385 Tanks (1.6 GPF)

Complete Replacement System for Gerber 28-385 Tanks (1.6 GPF)

The Flushmate III M-101526-F33 1.6 GPF Replacement System, is designed to replace the Flushmate M-101526-F3 1.6 gpf 503 Series models for two piece 10" rough-in Gerber 28-385 toilet fixtures.The unit includes the Flushmate M-101526-F3 complete system with locknuts and gasket to install in your toilet tank.The Replacement system is designed to only work with existing Gerber 28-385 pressure assist toilets that were originally equiped with the Flushmate III M-101526-F3 1.6 GPF system.

Product Features:

• The flush volume will never decrease, which means water savings are sustained for the life of the fixture.
• Flushmate equipped toilets use pressure (versus gravity) to produce a longer drain carry, pushing waste up to 33% further than the recommendations set by the American National Standards Institute (ANSI). Test conducted according to ANSI standard procedures as discussed in APSE Research Report 91-01.
• 70 gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush
• 5-Year warranty

Product Components

• (1) M-101526-F3 Flushmate III 1.6 GPF Replacement System
• (1) Flushmate Tank to Toilet Tank Gasket (Gasket between Flushmate System and toilet tank)
• (1) Flushmate Tank to Toilet Tank Locknut (Locknut to mount Flushmate System into the toilet tank)
• (1) Flushmate Tank to Bowl Gasket (Gasket between toilet tank and toilet bowl)
• (1) Flushmate Lower Supply Locknut (Locknut to mount Flushmate System into the toilet tank)