Complete Replacement System for Mansfield, St. Thomas/Vitromex, Peerless, Sloan, Vitra & Western Tanks (1.0 GPF)

Complete Replacement System for Mansfield 153 , St Thomas/Vitromex, Peerless 1, Sloan ST-8016 and ST-8116, Vitra 5066, and Western T4ULF-PF-1 Tanls (1.0 GPF)

The Flushmate IV M-101526-F42 1.0 GPF Replacement System, is designed to replace the Flushmate M-101526-F4 1.0 gpf 504 Series models for two piece toilet fixtures. The unit includes the Flushmate M-101526-F4 complete system with locknuts and gasket to install in your toilet tank. The replacement system is designed to only work with existing pressure assist toilets that were originally equipped with the M-101526-F4.

Product Features:

• The flush volume will never decrease, which means water savings are sustained for the life of the fixture.
• Flushmate equipped toilets use pressure (versus gravity) to produce a longer drain carry, pushing waste up to 33% further than the recommendations set by the American National Standards Institute (ANSI). Test conducted according to ANSI standard procedures as discussed in APSE Research Report 91-01.
• 70 gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush
• 5-Year warranty

Product Components

• (1) M-101526-F4 Flushmate III 1.0 GPF Replacement System
• (1) Flushmate Tank to Toilet Tank Gasket (Gasket between Flushmate System and toilet tank)
• (1) Flushmate Tank to Toilet Tank Locknut (Locknut to mount Flushmate System into the toilet tank)
• (1) Flushmate Tank to Bowl Gasket (Gasket between toilet tank and toilet bowl)
• (1) Flushmate Lower Supply Locknut (Locknut to mount Flushmate System into the toilet tank)