Galvanized Steel J-Hanger Rings are pipe and tubing supports used to hold plumbing runs in place, and the Holdrite Silencer J-Hangers are a good example, pairing a carbon steel frame with a TPE liner. Holdrite lists the line for pipe and tubing from 1/2" to 4" in size. The liner is rated 45 Shore A, and the hangers conform to MSS SP-58 and SP-69 (Type 5). Operating temperature for the 322, 323, 328 and 330 runs from minus 50°F to 225°F. Holdrite describes the Silencer J-Hanger as providing acoustic noise isolation and protection against dissimilar metal contact, so the hanger does more than carry weight. Load capacity changes with size. The 322 and 323 are rated for 400 lb, while the 328 and 330 are rated for 800 lb. Matching the hanger to the pipe size and load rating before the job starts keeps the support sound, quiet and consistent with the standards the manufacturer lists.
Subcategories
Buying Guide
Start with the pipe or tubing size, because each Holdrite Silencer model is built for specific IPS and CTS dimensions. The 322 fits 3/4" IPS and 1" CTS, the 323 fits 1" IPS and 1-1/4" CTS, the 328 fits 3" IPS, and the 330 fits 4" IPS and 4" CTS. Confirm whether the run is iron pipe or copper tube before ordering, since the two size systems do not match.
Next, check the load rating against the weight of the filled run. The 322 and 323 are rated for 400 lb, and the 328 and 330 are rated for 800 lb. Larger-diameter runs should be checked against the 800 lb models first.
Then think about the application. When choosing Galvanized Steel J-Hanger Rings for a job where pipe noise or metal-to-metal contact is a concern, the TPE liner is the feature to weigh. Holdrite lists the liner at 45 Shore A and describes the hanger as providing acoustic noise isolation and protection against dissimilar metal contact. Compare the operating range of minus 50°F to 225°F with the system's service temperature.
Finally, verify code and spec requirements. Holdrite states conformance with MSS SP-58 and SP-69 (Type 5), and the load rating complies with MSS SP-58. Check the hanger dimensions too. The 322 measures 2.30" L by 0.90" W by 3.40" H, while the 330 measures 6.20" L by 1.30" W by 8.60" H, which matters in tight framing.
Frequently Asked Questions
What pipe sizes do Galvanized Steel J-Hanger Rings like the Holdrite Silencer cover?
Holdrite lists its Silencer J-Hanger line for pipe and tubing from 1/2" to 4" in size. Among the models, the 322 fits 3/4" IPS and 1" CTS, the 328 fits 3" IPS, and the 330 fits 4" IPS and 4" CTS.
What load rating do Holdrite Silencer J-hangers carry?
Load rating depends on the model. The Holdrite 322 and 323 are rated for 400 lb, and the 328 and 330 are rated for 800 lb. Each model's load rating complies with MSS SP-58.
What temperature range can these J-hangers handle?
The Holdrite Silencer J-Hanger models 322, 323, 328 and 330 are listed for operation from minus 50°F to 225°F. Compare that range with the service temperature of the pipe before choosing a J-hanger from this line.
Do Holdrite Silencer J-hangers meet MSS SP-58 and SP-69?
The Holdrite Silencer J-Hanger models 322, 323, 328 and 330 conform to MSS SP-58 and SP-69 (Type 5). Their load ratings also comply with MSS SP-58. Verify the standard called for in the project spec before selecting a J-hanger.
Why does a Holdrite J-hanger have a TPE liner?
The liner on a Holdrite Silencer J-Hanger provides acoustic noise isolation and protection against dissimilar metal contact. It is a natural off-white TPE rated 45 Shore A. A lined J-hanger like this one matters on runs where pipe noise or metal contact is a concern.