| Frequency: | 60 Hz 60 Hz 60 Hz |
|---|---|
| Horse Power: | 3/4 |
| Application: | Zoning |
| Material: | Cast Iron |
| Voltage: | 115V |
| Max Pressure (PSI): | 145 |
| Type: | 3-Speed Pump |
| Max Flow (GPM): | 32.9 |
| Flow Range (GPM): | 0-32.9 |
| Max Head (Ft): | 52.5 |
| Head Range (ft.): | 0-52.5 |
| Phase: | 1 |
| Connection Size: | 1-1/2" |
| Mount: | In-Line |
As per the troubleshooting guide provided in the installation manual when the red light is on and the pump does not run then the pump has been cut out by the thermal over-load switch due to high liquid temperature or blocked rotor. They note to check that the liquid temperature falls within the specified range. The pump will restart automatically when it has cooled to normal temperature. NOTE: If the thermal overload switch has cut out the pump three times within a short period, the pump must be restarted manually by switching off the electrical supply.
This is a 115v pump.
115 volt