Individual Indoor or Outdoor Units in this category are LG Art Cool Mirror components, each pairing a decorative wall-mounted indoor head with a matching outdoor condenser for single-zone heating and cooling. Instead of a standard plastic grille, the Art Cool Mirror indoor unit uses a reflective mirror-finish front panel that blends into a bedroom, office, or living space rather than standing out like a typical mini-split head. The LG LA090HSV5 package delivers 9,000 BTU of heating and cooling at a 23.2 SEER2 rating on R-410A refrigerant, while the KSUAB121A steps up to 12,000 BTU on R-32 with a 22.5 SEER2 rating and built-in WiFi for app-based control. Contractors replacing a failed indoor head or outdoor compressor, or adding a single zone to an existing system, can source the matching component separately rather than buying a full bundled package. Matching nameplate capacity and refrigerant type between indoor and outdoor components keeps the system running at its rated efficiency.
Subcategories
Buying Guide
Start with the zone's heating and cooling load before picking a model. A bedroom or small office typically needs a 9,000 BTU indoor head like the LA090HSV5, while a larger room or open layout may call for the 12,000 BTU KSUAB121A. Refrigerant type matters just as much as capacity. R-410A and R-32 units use different line sets and service tools, so an indoor head and outdoor condenser must share the same refrigerant to function as a matched pair. Contractors browsing Individual Indoor or Outdoor Units for a replacement job should confirm the existing system's model number and refrigerant before ordering a single component, since mixing a new head with an incompatible outdoor unit can void coverage and hurt performance. For new installations, a bundled heat/cool package simplifies ordering because the indoor and outdoor pieces already match on capacity and SEER2 rating. Homeowners who prioritize appearance alongside performance benefit from the Art Cool Mirror's reflective panel, which suits a finished living space better than a standard grille. For projects that call for smartphone control, built-in WiFi models like the KSUAB121A remove the need for an add-on wireless kit. Confirm electrical requirements and line-set length limits against the manufacturer's installation manual before finalizing a quote, since these vary by capacity and configuration.
Frequently Asked Questions
Can an Art Cool Mirror indoor head be installed with a standard outdoor condenser?
Individual Indoor or Outdoor Units in the Art Cool Mirror line need an outdoor condenser that matches the indoor head's capacity and refrigerant type, whether R-410A or R-32. Pairing mismatched components can reduce efficiency and affect manufacturer coverage. Contractors should confirm the exact model pairing listed by LG before ordering a replacement. Sourcing the matching outdoor unit separately is possible when only one component has failed.
What is the difference between the LA090HSV5 and KSUAB121A?
The LA090HSV5 is a 9,000 BTU heat/cool package rated at 23.2 SEER2 on R-410A refrigerant. The KSUAB121A is a 12,000 BTU indoor unit rated at 22.5 SEER2 on R-32 refrigerant with built-in WiFi. Selecting between them depends on the zone's square footage and whether smartphone control is wanted. Both are part of the Art Cool Mirror design line.
Do Art Cool Mirror units require a separate WiFi accessory?
Some models, including the KSUAB121A, include built-in WiFi, so no add-on accessory is needed for app-based control. Models without built-in WiFi may require a separate wireless kit for the same functionality. Checking the specific model's listed features before ordering avoids an unnecessary accessory purchase. Built-in WiFi models suit customers who want remote scheduling without extra wiring.
Can the indoor and outdoor units be purchased separately?
Individual Indoor or Outdoor Units in this category are sold as standalone components as well as bundled packages. Replacement jobs typically call for ordering just the failed indoor head or outdoor condenser. New installations often use a bundled package since the components already match on capacity and refrigerant. Matching nameplate specs between a standalone component and the existing system is necessary either way.
What refrigerant do these units use?
Models in this lineup use either R-410A or R-32 refrigerant, depending on the specific unit. The LA090HSV5 package runs on R-410A, while the KSUAB121A runs on R-32. Indoor and outdoor components must share the same refrigerant type to operate as a matched system. Checking the model's listed refrigerant before ordering a replacement part prevents a mismatch.