CAF, 2 Ton High Efficiency Clean Air Furnace (800 CFM)

Clean Air Furnace uses a hydronic coil for uniform temperature distribution and supplied and built in HRV (common fan).

Features:

• The crossflow heat exchanger balances efficiency, compact size and excellent cold temperature performance. With our recirculation defrost strategy the sensible heat recovery efficiency (SRE) at -25C (defrosting) can be within a few percent of the 0C SRE (no defrost) delivering significant energy savings. Each core is tested to ensure low leakage.
• Serviceability: Side service clearance 1', front service clearance 3'.
• Case 20GA pre paint galvanized steel, and EPP
• Insulation: Insulated Fiberglass duct liner and EPS.
• Filters: 1" Pleated on return & washable on HRV
• Mounting: Typical furnace
• Motors and Blowers: 1/3 HP ECM motor with forward curved blower.

Specifications:

• Up flow -Return Air select Left or Right side.
• Small Coil - 4 rows
• Heating capacity - 2 Tons
• 100-140 CFM Core
• Voltage: 120V
• Frequency: 60 Hz
• Phase: 1
• Current: 8 A
• Airflow High: 800 CFM
• Static Pressure: 0 IN. WG
• Drain: Yes