Mission Couplings (Cast Iron to Copper) are shielded transition couplings that join cast iron pipe to copper pipe in gravity flow piping. The Band-Seal CK series from Mission Rubber connects cast iron, plastic, steel, or copper pipe to plastic, steel, or copper pipe, in sizes from 3/4 inch to 4 inch. Each coupling uses 301 series stainless steel worm drive clamps, a 300 series stainless steel shield, and a molded one-piece elastomeric sealing gasket. Models on SupplyHouse include the CK22, CK33, CK44, CK43, and CK115. Mission lists the CK series for non-pressure, gravity flow applications only, so the series is not a fit for pressurized piping. A thick shear band opposes shear forces while maintaining pipe alignment. Matching the model to the pipe materials and sizes gives installers a watertight, reusable joint.
Subcategories
Buying Guide
Start with the application. Mission lists the CK series for non-pressure, gravity flow applications only, so confirm the line is not pressurized before selecting any model. Review Mission's installation recommendations for the location as well.
Next, match the two pipe sizes. The model number shows them: the CK22 is 2 inch by 2 inch, the CK33 is 3 inch by 3 inch, the CK44 is 4 inch by 4 inch, and the CK43 joins 4 inch cast iron to 3 inch copper.
Then compare hardware. The CK series uses 301 series stainless steel worm drive clamps, either 2 or 4 per coupling, and a 300 series stainless steel shield. When specifying Mission Couplings (Cast Iron to Copper), also look at the molded one-piece elastomeric gasket and the internal pipe stop, which positions the pipe and reduces noise and vibration.
Plan the tightening step before the crew arrives at the site. Mission recommends a torque wrench pre-set to 60 in/lbs with a .3125 inch hex head, and offers installation instructions for download.
Finally, check standards for the job. The CK series meets ASTM A240/A240M-06, ASTM C564-03, ASTM C1460-00, CSA Class 7021-02, and IAPMO File 11464. Confirm those match the local code and the engineer's specification. Mission also describes the couplings as reusable, which helps on repair work.
Frequently Asked Questions
What do Mission Couplings (Cast Iron to Copper) connect?
Mission's Band-Seal CK series connects cast iron, plastic, steel, or copper pipe to plastic, steel, or copper pipe. Mission Couplings (Cast Iron to Copper) such as the CK22 and CK33 join cast iron to copper in matching sizes. Pick the model by the two pipe sizes.
Can Mission cast iron to copper couplings be used on pressurized lines?
No. Mission lists the CK series for non-pressure, gravity flow applications only. Use a different product for pressurized piping and confirm the application with Mission.
What torque do Mission CK couplings need?
Mission recommends a torque wrench pre-set to 60 in/lbs with a .3125 inch hex head for CK series couplings. Follow Mission's installation instructions, which Mission offers for download.
What are the clamps and shield made of on Mission couplings?
The Mission CK series uses 301 series stainless steel worm drive clamps, with 2 or 4 per coupling, and a 300 series stainless steel shield. The gasket is a molded, one-piece elastomeric sealing gasket. Sealing O rings under each clamp help prevent pipe end slippage.
What sizes do Mission cast iron to copper couplings come in?
The Mission CK series runs from 3/4 inch to 4 inch overall. SupplyHouse lists the CK115 at 1-1/2 inch, the CK22 at 2 inch, the CK33 at 3 inch, the CK44 at 4 inch, and the CK43 at 4 inch cast iron by 3 inch copper. Check the model number against both pipe sizes before ordering.