Mueller Streamline ACR Copper Press Long Radius 90° Elbows are press-connection copper fittings used to make a 90 degree turn in ACR copper tube runs. Mueller Streamline lists a continuous operating pressure of 700 PSI for its ACR Copper Press fittings, with a continuous operating temperature range of minus 40°F to 250°F. Sizes run from 1/4 inch to 1-3/8 inch OD, so a single fitting style spans a wide range of tube sizes. Joints are made with a press tool, and Mueller notes that Milwaukee Tool supplies proprietary jaws and that the jaws are compatible with leading full-size press tools. The line carries a 10 year limited warranty. Elbows appear in nearly every ACR piping run, so the pressure rating, temperature range and tube size on the fitting matter as much as the press connection itself. Matching those details to the system avoids rework and callbacks.
Subcategories
Buying Guide
Start with tube size. Press fittings are made for a specific tube outside diameter, and Mueller Streamline offers ACR Copper Press fittings from 1/4 inch to 1-3/8 inch OD. Read the OD on the tube, then match the elbow to it before comparing anything else.
Next, check the ratings against the system. Mueller lists a 700 PSI continuous operating pressure and a continuous operating temperature range of minus 40°F to 250°F, with a sealing ring rating of minus 40°F to 300°F. Compare those figures to the design pressure and operating conditions of the circuit before ordering.
When specifying Mueller Streamline ACR Copper Press Long Radius 90° Elbows, think about layout. A long radius pattern makes a gentler turn than a short radius elbow, which matters where flow path and tube routing are tight. Leave clearance around each joint for the press jaws.
Confirm the press tooling next. Mueller notes that Milwaukee Tool supplies proprietary jaws and that the jaws are compatible with leading full-size press tools. Test the jaw and tool pairing in the shop so a mismatch does not stall the job on site.
Finally, verify approvals and code. Mueller lists approvals for the line including UL 207, UL 1963, ASHRAE 15, ASME B31.5 and CSA C22.2. Confirm those match the jurisdiction's requirements, and note the 10 year limited warranty that Mueller lists for the line.
Frequently Asked Questions
What pressure are Mueller Streamline ACR copper press long radius 90 elbows rated for?
Mueller Streamline ACR Copper Press Long Radius 90° Elbows belong to the ACR Copper Press line, which Mueller lists at 700 PSI continuous operating pressure. Compare that figure to the design pressure of the system before specifying.
What temperature range can ACR copper press elbows handle?
Mueller lists a continuous operating temperature range of minus 40°F to 250°F for its ACR Copper Press fittings. The sealing ring is rated from minus 40°F to 300°F. Check those limits against the conditions on the circuit being piped.
What tube sizes do Mueller ACR copper press long radius elbows cover?
Mueller Streamline ACR Copper Press fittings run from 1/4 inch to 1-3/8 inch OD. Match each long radius 90° elbow to the tube OD on the job. The individual product pages show the exact sizes for each elbow.
What press jaws work with Mueller ACR press fittings?
Mueller notes that Milwaukee Tool supplies proprietary jaws for its ACR Copper Press line and that the jaws are compatible with leading full-size press tools. Confirm the jaw and tool pairing before starting a job with these elbows.
Is there a warranty on Mueller Streamline ACR copper press fittings?
Mueller Streamline lists a 10 year limited warranty for its ACR Copper Press fittings. Long radius 90° elbows are sold under that product line. Read Mueller's warranty terms for coverage details and conditions.