PVC Schedule 40 Crosses are four-way fittings that join four runs of Schedule 40 PVC pipe at a single intersection. Spears lists ASTM D2466, the standard specification for PVC plastic pipe fittings in Schedule 40, as the applicable spec for its Schedule 40 line, and the 420 series includes the 420-030, a 3 inch cross. Spears also points to NSF Standard 14 for products that meet potable water requirements, so contractors should confirm the marking on the exact model. Installers use crosses where two lines meet and one fitting has to carry all four connections. Choosing the correct size style and standard before ordering matters because four connections are committed at once, and the cross needs to match the pipe standard used on the rest of the system.
Subcategories
Buying Guide
Start with the pipe standard and size. Spears identifies ASTM D2466 as the specification for its Schedule 40 PVC fittings and ASTM D1785 as the specification for Schedule 40, 80, and 120 PVC pipe, so check the project spec against both. Confirm the nominal pipe size for every opening, because a 3 inch equal cross such as the Spears 420-030 will not serve a run that reduces.
Decide between an equal cross and a reducing cross. Equal models, like the 420-030, put one size on all four openings. Reducing models such as the 420-702F and 420-670F list two sizes, so read the size pair and note which opening takes which size before placing the order. When shopping PVC Schedule 40 Crosses, also ask whether a cross is the right fitting at all, since two tees can serve some layouts.
Check potable water requirements next. Spears points to NSF Standard 14 for products that meet potable water requirements, so look for the marking on the specific fitting if the system carries drinking water. Finally, plan the rest of the joint, including pipe and joining supplies, as separate line items matched to the pipe size and standard, and record each cross model number against its size pair so the right fitting reaches the job.
Frequently Asked Questions
What is a PVC Schedule 40 cross used for?
PVC Schedule 40 Crosses join four runs of Schedule 40 PVC pipe at one intersection. Installers use them where two lines meet and every opening needs a connection. Confirm the size of each opening before ordering.
What standard do Schedule 40 PVC crosses meet?
Spears identifies ASTM D2466 as the specification for its Schedule 40 PVC fittings, which include PVC Schedule 40 Crosses in the 420 series. The matching pipe specification Spears lists is ASTM D1785. Check the model's documentation if a project spec calls out a standard.
Are Schedule 40 PVC crosses approved for potable water?
Spears points to NSF Standard 14 for products that meet potable water requirements. Confirm that a specific PVC Schedule 40 Cross carries the marking before using it on a drinking water system. When the documentation is unclear, check with the manufacturer.
What is the difference between an equal and a reducing Schedule 40 cross?
An equal cross has one size on all four openings, like the 3 inch Spears 420-030. A reducing cross lists two sizes, as with the Spears 420-702F. PVC Schedule 40 Crosses in reducing styles need the size pair read carefully against the pipe on the job.
Can a cross be used in place of two tees?
A PVC Schedule 40 Cross puts four connections in one fitting, while two tees spread the same connections over two fittings. Which one fits depends on the layout and the pipe sizes. Check the project drawings before choosing.