Service Weight Cast Iron 45° Elbows are cast iron fittings used in sanitary drain, waste and vent (DWV), sewer and storm drainage applications. The Charlotte elbows in the catalog sample come in 2", 3" and 4" sizes, and each is listed as cast iron with a 45 degree angle. Plumbers and drain installers use a 45 degree elbow when a run needs a gradual change of direction rather than a sharper turn. Each product name lists the size, material and angle, so matching a fitting to the existing pipe starts with the listing. Contractors working on DWV, sewer or storm lines can compare sizes across the category and confirm the fitting against the pipe on the job before ordering. Getting the size and angle correct on the first order keeps the drainage layout on schedule and avoids rework.
Subcategories
Buying Guide
Start with the pipe size. The Charlotte elbows in the catalog sample come in 2", 3" and 4" sizes, so measure or confirm the existing line and match the fitting size to it. Next, confirm the material. Every elbow in the sample is listed as cast iron, which suits a run that is already cast iron and keeps the system consistent. Then check the angle. The listings here are 45 degree elbows, so confirm that a 45 degree change of direction fits the layout before ordering. After that, match the application. The product descriptions state use in sanitary drain, waste and vent (DWV), sewer and storm drainage applications, so compare that list against the system being built or repaired. When comparing Service Weight Cast Iron 45° Elbows, also read the product page for the specific size rather than assuming details carry across sizes. The listings note that images may not represent the actual product, so rely on the written size, material and angle instead of the photo. Finally, plan the fitting count before ordering. A drain layout often needs more than one elbow to make an offset or a longer change of direction, so count each turn and confirm the sizes in the run. Record the size and angle on the job sheet so a later repair can match the original fitting.
Frequently Asked Questions
What are Service Weight Cast Iron 45° Elbows used for?
Service Weight Cast Iron 45° Elbows are used in sanitary drain, waste and vent (DWV), sewer and storm drainage applications, according to the Charlotte product descriptions. They change the direction of a run by 45 degrees.
What sizes do Service Weight Cast Iron 45° Elbows come in?
The catalog sample shows Charlotte Service Weight Cast Iron 45° Elbows in 2", 3" and 4" sizes. The category page shows the full range.
What material are these 45 degree elbows made from?
The Service Weight Cast Iron 45° Elbows in the sample are listed as cast iron. Confirm the material against the existing pipe on the job before ordering.
Do the product photos show the exact elbow?
The listings for Service Weight Cast Iron 45° Elbows note that the image may not represent the actual product. Rely on the size, material and angle in the product name and specifications instead.
Which brand makes the elbows in this category?
The Service Weight Cast Iron 45° Elbows in the catalog sample are from Charlotte. Check the product page for the brand and size of any other elbow in the category.