Service Weight Cast Iron Reducers are fittings that connect two different pipe sizes in a service weight cast iron system. Charlotte's reducers on the page include 3" x 2", 4" x 2", 4" x 3" and 5" x 4" sizes in cast iron. Charlotte describes service cast iron pipe, fittings and compression gaskets as used in sanitary drain, waste and vent, sewer and storm drainage applications. The system is intended for non-pressure applications. Reducers change pipe size where a run steps from a larger line to a smaller one, so the right size pair keeps the layout working as designed. Each reducer is listed as its own size combination, so matching both pipe sizes before ordering avoids a delay on the job. Contractors working on sanitary, sewer or storm lines get the most from knowing the size pair in advance.
Subcategories
Buying Guide
Start with the application. Charlotte describes service cast iron pipe, fittings and compression gaskets as used in sanitary drain, waste and vent, sewer and storm drainage applications, and the system is intended for non-pressure use. Confirm the line being reduced falls into one of those categories before ordering.
Next, identify both pipe sizes. A reducer is named for its two ends, such as 3" x 2", 4" x 2", 4" x 3" or 5" x 4", so read the size pair in the product name and the specifications rather than relying on the image. The listing notes that the image may not represent the actual product.
When comparing Service Weight Cast Iron Reducers, keep the rest of the system in mind. The fittings are cast iron, and Charlotte pairs service cast iron pipe and fittings with compression gaskets, so plan the gaskets and pipe at the same time as the reducer. Matching all three to the same service weight system avoids surprises at the joint.
Finally, think through the run before building it. Count each size change, list the pipe sizes for each end of it, and write the reducer size pair on the material list so the order matches the layout. A short pre-order check by the foreman costs little and prevents a mismatch from stopping the work.
Frequently Asked Questions
What are service weight cast iron reducers used for?
Service Weight Cast Iron Reducers connect two different pipe sizes in a service weight cast iron system. Charlotte describes the system as used in sanitary drain, waste and vent, sewer and storm drainage applications. The system is intended for non-pressure applications.
What sizes do service weight cast iron reducers come in?
Sizes on the Service Weight Cast Iron Reducers page include 3" x 2", 4" x 2", 4" x 3" and 5" x 4" from Charlotte. Each is cast iron. Confirm the size pair in the product name before ordering.
Can service weight cast iron reducers be used on pressure lines?
Service weight cast iron reducers are intended for non-pressure applications. Charlotte describes the system as used in drain, waste, vent, sewer and storm drainage work. Confirm the application before choosing a fitting.
Do I need gaskets with service weight cast iron reducers?
Charlotte describes service cast iron pipe, fittings and compression gaskets as part of the same system. Each reducer listing describes the fitting, so confirm the gaskets and pipe needed for the joints separately.
Does the product image show the exact reducer size?
The listings for Service Weight Cast Iron Reducers note that the image may not represent the actual product. Read the size pair in the product name and specifications instead. For example, Charlotte's 5" x 4" reducer is listed with a 5" x 4" size.