SharkBite Contractor & Irrigation Kits are pre-packed sets of push-to-connect fittings and accessories that put common sizes in one case. The SharkBite Contractor Kit with Toolbox pairs assorted 1/2 inch and 3/4 inch fittings with disconnect clips, disconnect tongs, a depth gauge, and a deburring tool. The SharkBite 22795 irrigation kit carries a maximum pressure rating of 200 PSI and a maximum temperature rating of 200°F, and it meets ASTM F877, ASTM F1960, and NSF standards. SharkBite fittings connect to PEX, copper, CPVC, PE-RT, and SDR-9 HDPE pipe without crimping, glue, or soldering. The category also covers support items such as a heavy-duty tool box and a silicone wrap made for buried brass fittings. A kit kept on the truck reduces supply house runs, keeps repair and service calls moving, and gives a crew a consistent set of parts for everyday water distribution work.
Subcategories
Buying Guide
Start with the pipe size and material on the job. The SharkBite Contractor Kit with Toolbox covers 1/2 inch and 3/4 inch work, while the SharkBite 22795 irrigation kit carries 3/4 inch and 1 inch fittings. If a repair needs a different size, a loose fitting is a better pick than a kit.
Next, confirm the pipe type. SharkBite fittings connect to PEX, copper, CPVC, PE-RT, and SDR-9 HDPE, and the irrigation kit lists PEX, OD controlled copper, and CPVC tubing. Check the pipe on the job against the kit's listed compatibility before the case goes on the truck.
Then check operating conditions. The 22795 is rated for a maximum of 200 PSI and 200°F, so compare those numbers with system pressure and water temperature. The irrigation kit meets ASTM F877, ASTM F1960, and NSF.
When choosing among SharkBite Contractor & Irrigation Kits, think about how the parts get used. A crew handling mixed repairs benefits from the contractor kit's assortment of couplings, elbows, tees, and plugs, along with the disconnect tongs and clips needed for removal. A crew running buried lines should add silicone wrap for brass fittings that sit in soil.
Finally, plan for restocking. Because the tool box is listed as its own item, a tech can refill a case after each job instead of replacing the whole kit. Verify local code and the manufacturer's installation instructions before installing push-fit fittings on any application.
Frequently Asked Questions
What comes in the SharkBite Contractor Kit with Toolbox?
The SharkBite Contractor Kit with Toolbox includes two each of 1/2 inch and 3/4 inch couplings, a 3/4 inch by 1/2 inch reducing coupling, female and male connectors, and elbows. It also has one each of 1/2 inch and 3/4 inch tees, plugs, disconnect clips, and disconnect tongs. A depth gauge, a deburring tool, and a heavy-duty tool box round out the set.
What pipe do SharkBite kit fittings work on?
SharkBite fittings in contractor kits connect to PEX, copper, CPVC, PE-RT, and SDR-9 HDPE pipe. No special tools, crimping, glue, or soldering is needed. The SharkBite 22795 irrigation kit specifically lists PEX, OD controlled copper, and CPVC tubing.
What pressure and temperature is the SharkBite irrigation kit rated for?
The SharkBite 22795 irrigation kit is rated for a maximum pressure of 200 PSI and a maximum temperature of 200°F. It meets ASTM F877, ASTM F1960, and NSF standards. The ratings belong to that kit, so check the listing for any other SharkBite kit before relying on them.
When should I wrap SharkBite brass fittings with silicone wrap?
Silicone wrap is used on SharkBite brass fittings, both push-to-connect and barb, when they are buried. The SharkBite 25406A is a non-adhesive, self-fusing tape that protects fittings from soil contaminants. It resists UV, oil, salt, and corrosive chemicals.
Can I buy a SharkBite contractor tool box without the kit?
The SharkBite U3001A contractor tool box is listed as a separate item in SharkBite Contractor & Irrigation Kits. A tech can use it to organize or restock fittings, disconnect clips, and tongs between jobs. Check the listing for current product details before ordering.