SharkBite Slip Ball Valves are push-fit shutoff valves for adding or replacing a ball valve in an existing water line. The models shown list lead free construction and a 25 year warranty. The Max quarter-turn valves in 1/2 inch and 3/4 inch sizes are rated for 250 PSI and a maximum of 200 degrees F. The Max slip feature lets a tech remove two inches of rigid copper or CPVC pipe from the line, then use the disconnect tool to slide the fitting to the other end of the pipe and close the gap. The 1 inch model is a forged brass, full port valve rated for 200 PSI. Contractors use these valves for service shutoffs, repairs, and emergency fixes after a freeze. Pressure rating, size, and pipe material decide which valve fits a given job, so those specs are worth checking before any pipe gets cut.
Subcategories
Buying Guide
Start with line size and pipe material, because those two facts narrow the choice fastest. The models shown come in 1/2 inch, 3/4 inch, and 1 inch sizes, and the 1 inch model connects to copper tubing, CPVC, and PEX through its push-fit ends. Match the valve to the actual pipe before comparing anything else.
Check the pressure rating next. The Max quarter-turn models in 1/2 inch and 3/4 inch are rated for 250 PSI, while the 1 inch model is rated for 200 PSI. Each model shown lists a maximum temperature of 200 degrees F, so the system's operating conditions should be compared against that figure before a valve is chosen.
When comparing SharkBite Slip Ball Valves, decide whether the job is a repair on an existing line or a new shutoff. The Max slip feature allows two inches of rigid copper or CPVC pipe to be removed from the line and reconnected with the disconnect tool, which suits retrofit repairs. Each valve also lists its own insertion depth: 1-1/4 inches on the 1/2 inch and 3/4 inch Max valves, and 1-5/16 inches on the 1 inch valve.
Each model shown lists lead free construction and a 25 year warranty, so those points will not separate one size from another. The deciding factors stay size, pipe material, and pressure rating.
Frequently Asked Questions
What pipe can SharkBite slip ball valves connect to?
The 1 inch SharkBite slip ball valve connects to copper tubing, CPVC, and PEX with push-fit ends and no soldering, clamps, unions, or glue. The Max slip models are described for use with rigid copper or CPVC pipe when the slip feature is used. Confirm the pipe type against the specific size before planning the job.
How does the slip feature on the Max slip ball valves work?
The slip feature on SharkBite Max slip ball valves allows two inches of rigid copper or CPVC pipe to be cut out of an existing line. The disconnect tool is then used to slide the fitting to the other end of the pipe, which reconnects the line. The design suits adding or replacing a valve in an existing line.
What pressure rating do SharkBite slip ball valves have?
The SharkBite Max quarter-turn slip ball valves in 1/2 inch and 3/4 inch are rated for 250 PSI. The 1 inch SharkBite slip ball valve is rated for 200 PSI. Each model shown lists a maximum temperature of 200 degrees F.
Are SharkBite slip ball valves lead free?
Each SharkBite slip ball valve shown is listed as lead free, and each lists a 25 year warranty. Specs still vary by size and model. Check the individual product listing for the exact valve being used.
What insertion depth do SharkBite slip ball valves list?
Insertion depth is listed per model on SharkBite slip ball valves. The 1/2 inch and 3/4 inch Max slip ball valves list 1-1/4 inches, and the 1 inch SharkBite slip ball valve lists 1-5/16 inches. Check the listing for the exact valve before planning pipe lengths.