Supco Parts are replacement electrical and control components for HVACR service work, including hard start kits, contactors and run capacitors. Supco's DP30242 contactor, for example, is a 2 pole unit rated for 30A FLA with a 24V coil. Capacitors such as the CD35+5X370 oval dual run capacitor carry 35+5 MFD at 370 VAC. Hard start kits like the SPP6E cover compressors from 1/2 to 3 HP, while the SPP5 Super Boost covers 1/2 to 10 HP. Supco's URCO410RC 4 in 1 part combines a relay, overload, start capacitor and 15 microfarad run capacitor in one assembly. Techs rely on parts like these for the common failures on condensers, furnaces and refrigeration equipment, which makes exact electrical ratings the main point to verify. Matching the rating on the failed part keeps repairs short and reduces return visits.
Subcategories
Buying Guide
Start with the rating on the original part, since replacements are chosen on electrical specs, not appearance. Record the voltage, capacitance, horsepower or amperage before ordering.
For capacitors, match microfarads and voltage to the original. The CD35+5X370, for example, is a 35+5 MFD, 370 VAC oval dual run capacitor with a plus or minus 5% tolerance. It is listed for condenser fan motors, furnace blower motors, and refrigeration and air conditioning compressors.
For hard start kits, match horsepower range and compressor type. The SPP6E covers 1/2 to 3 HP on PSC and CSIR compressors, while the SPP5 covers 1/2 to 10 HP on PSC compressors. Confirm the system is single phase before installing either one.
For contactors, check pole count, coil voltage and load ratings. The DP30242 is a 2 pole contactor with a 24V coil, 30A FLA and 40A RLA, and it uses 10-32 screw terminations. When buying Supco Parts, compare those ratings line by line against the failed part.
Finally, consider operating conditions and approvals. The DP30242 is listed for minus 40°F to 150°F and holds UL recognition and CSA approval, and the SPP6E is NATE Recognized and UL Recognized. The CD35+5X370 is listed for minus 40°F to 185°F and is manufactured to UL and VDE standards.
Frequently Asked Questions
What compressors does the Supco SPP6E hard start kit work on?
The Supco SPP6E is rated for PSC and CSIR compressors from 1/2 to 3 HP. It combines an electronic potential relay with a start capacitor and uses simple 2-wire installation. Confirm the unit is single phase before installing it.
What does the Supco SPP5 Super Boost do?
The Supco SPP5 Super Boost is a hard start kit that pairs a PTC relay with a start capacitor. Supco lists it for 1/2 to 10 HP PSC compressors with a 300% torque increase. It uses easy 2-wire installation.
What are the ratings on the Supco DP30242 contactor?
The Supco DP30242 is a 2 pole contactor with a 24V coil, 30A FLA and 40A RLA. It uses 10-32 screw terminations and is listed for minus 40°F to 150°F. Supco lists UL recognition and CSA approval.
What is the Supco CD35+5X370 capacitor used for?
The Supco CD35+5X370 is an oval dual run capacitor rated 35+5 MFD at 370 VAC. Supco lists it for condenser fan motors, furnace blower motors, refrigeration compressors and air conditioning compressors. Tolerance is plus or minus 5%.
What comes in the Supco URCO410RC hard start?
The Supco URCO410RC is a 4 in 1 hard start that includes a relay, overload protection, a start capacitor and a 15 microfarad run capacitor. It is rated for 1/4 to 1/3 HP and 6.8 amps RLA at 115 VAC. Supco lists RSIR, CSIR, PSC and CSR compressor compatibility.