Trane miscellaneous parts cover the ignition, motor, and draft components a technician needs to keep a Trane furnace or air handler running between full system replacements. The lineup includes hot surface ignitors such as the silicon-nitride IGN00152 rated for 120V operation, along with furnace control and ignitor kits like the KIT15816 that pair a control board with a matched ignitor. Draft inducer assemblies, including motor units like the FAN01311, restore proper venting when an inducer motor fails or starts drawing excessive amperage. Blower motor options such as the MOT21755, a 1/3 HP 850 RPM unit, and the MOT18698 ECM outdoor motor round out the category for airflow-related repairs. Because Trane furnaces are built around model-specific ignition and control components, sourcing the correct part number matters more here than with generic aftermarket parts, and having this range in one category speeds up the diagnostic-to-repair process on a service call.
Subcategories
Buying Guide
Start any Trane miscellaneous parts order with the furnace's model and serial number, found on a label inside the cabinet, since Trane ignition and control components are built to match specific furnace configurations rather than functioning as universal replacements. If the symptom is a no-heat call with a good gas valve, check whether the ignitor is the likely culprit; ignitors like the IGN00152 or IGN00145 are common failure points and relatively quick to swap once the correct part number is confirmed. If diagnostics point to a control fault, such as a furnace that won't start its ignition sequence at all, a bundled option like the KIT15816 furnace control and ignitor kit can save a return trip by replacing both components together. Draft inducer issues usually show up as a pressure switch error code; in that case, replacing the full inducer assembly rather than just the motor keeps the wheel and housing matched to factory tolerances. For airflow complaints, like a system that heats but blows weak air, compare the nameplate on the existing blower motor against replacement options such as the MOT21755 or MOT18698 to match horsepower, voltage, and RPM exactly. Because Trane's control boards and ignitors are matched components within an integrated system, verifying part compatibility against the furnace's documentation before ordering avoids a mismatched repair that fails inspection or triggers repeat callbacks.
Frequently Asked Questions
How do I find the right Trane furnace part number?
The furnace's model and serial number label is typically located inside the cabinet near the burner assembly or on a side panel. That model number determines which ignitor, control board, or motor is compatible with the unit.
What usually causes a Trane furnace to fail to ignite?
A cracked or degraded hot surface ignitor, such as the models in the Pilots & Ignitors category, is one of the most common causes of ignition failure. A faulty control board can also prevent the ignition sequence from starting even with a good ignitor.
What does a draft inducer assembly do?
A draft inducer assembly pulls combustion exhaust through the heat exchanger and out the vent before the burners are permitted to fire. A failing inducer motor commonly triggers a pressure switch error and blocks ignition entirely.
Can any blower motor be used as a replacement?
Blower motors need to match the original unit's horsepower, voltage, and RPM to keep airflow within the furnace's designed range. Options like the MOT21755 or MOT18698 are sized for specific Trane configurations rather than functioning as universal replacements.
Why does a control board and ignitor sometimes come as a kit?
A bundled kit like the furnace control and ignitor kit is offered because both components sometimes fail together or need matched replacement to confirm proper ignition sequencing. Ordering them as a set can save a return trip if diagnostics point to the control system rather than a single part.