Apply to be a TradeMaster!
Filter menu expanded

Filters

12 items
Reset

SORT

Product Availability
–

Show In Stock Only (8)

Used With
–

Ultra Commercial Boilers (8)
Ultra Gas Boilers (8)

Review Score
–

(5)
(1)

Price Range
–

$40 to $45 (1)
$50 to $60 (1)
$60 to $70 (1)
$70 to $80 (1)
$80 to $90 (1)
$200 to $300 (3)
$300 to $400 (3)
$400 to $500 (1)

Weil McLain Ultra Commercial Boiler Parts

Help Face
Need a little help?
FIND PARTS FOR YOUR UNIT
12 items
Grid
List
Compare
Product Image of Heat Exchanger Cleaning Tool w/ Handle, 591-706-200
$78.24 each
In Stock
Get 72 by Mon, Nov 23
In Stock
Get 72 by Mon, Nov 23
Compare
Product Image of Ultra U-Control Module for Ultra Series UE Boilers, 383-500-658
$400.50 each
In Stock
Get 51 by Mon, Nov 23
In Stock
Get 51 by Mon, Nov 23
Compare
Product Image of Return/Supply 2-Sensor Kit for Ultra Gas/Commercial Boilers, 383-500-602
$54.40 each
In Stock
Get 42 by Mon, Nov 23
In Stock
Get 42 by Mon, Nov 23
Compare
Product Image of Ignition Cable Kit for Ultra Gas/Commercial Boilers, 383-500-619
$60.30 each
In Stock
Get 20 by Mon, Nov 23
In Stock
Get 20 by Mon, Nov 23
Compare
Product Image of System Temperature Sensor for Ultra Gas & Commercial Boilers, 383-500-601
$40.50 each
In Stock
Get 43 by Mon, Nov 23
In Stock
Get 43 by Mon, Nov 23
Compare
Product Image of Display Board Assembly, 383-500-659
Display Board Assembly, 383-500-659
SKU: 383-500-659
Weil-McLain
SKU: 383-500-659
Brand: Weil-McLain
(10)
$366.17 each
In Stock
Get 10 by Mon, Nov 23
In Stock
Get 10 by Mon, Nov 23
Compare
Product Image of Transformer (120v/24v) for Ultra Gas/Commercial Boilers, 383-500-628
$89.30 each
In Stock
Get 3 by Mon, Nov 23
In Stock
Get 3 by Mon, Nov 23
Compare
Product Image of Display Board Assembly, 383-500-756
Display Board Assembly, 383-500-756
SKU: 383-500-756
Weil-McLain
SKU: 383-500-756
Brand: Weil-McLain
$298.44 each
In Stock
Get 4 by Mon, Nov 23
In Stock
Get 4 by Mon, Nov 23
Compare
Product Image of Low Gas Pressure Switch, 383-600-049
Low Gas Pressure Switch, 383-600-049
SKU: 383-600-049
Weil-McLain
SKU: 383-600-049
Brand: Weil-McLain
$345.29 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of Flue Kit for Ultra Series 1-4, 383-500-771
$257.83 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of Flue Kit for Ultra Series 1-4, 383-500-770
$242.73 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of High Gas Pressure Switch Replacement Kit, 383-600-048
$359.55 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Resources
FAQs, Manuals & Videos
Articles
More About Weil McLain Ultra Commercial Boiler Parts

Weil McLain Ultra Commercial Boiler Parts are replacement components built for the Ultra Commercial line of high-efficiency gas condensing boilers, which Weil-McLain manufactures in the 550 and 750 MBH size range. Parts in this category cover ignition, sensing, and control functions, including a system temperature sensor, a return and supply two-sensor kit, and an ignition cable kit rated specifically for the 550 and 750 models. A dedicated U-Control module is also available for the Ultra Series UE boiler platform. Technicians servicing commercial boiler rooms rely on parts matched to the exact Ultra Commercial model and size, since sensor and ignition components differ from those used on Weil-McLain's smaller residential Ultra Gas boilers. Because a commercial boiler failure can take a building's heating or hot water offline, having the correct sensor or ignition part on hand ahead of a scheduled service visit keeps downtime to a minimum during a repair.

Subcategories

  • Temperature Sensors: The System Temperature Sensor, part number 383-500-601, monitors boiler water temperature on Ultra Gas and Commercial boiler platforms and feeds that reading back to the boiler's control board. Technicians replace this sensor when a boiler throws a temperature reading fault or fails to modulate correctly. A matched Return/Supply 2-Sensor Kit, 383-500-602, covers both the return and supply sensor positions in a single part number for a more complete sensor replacement.
  • Ignition Components: The Ignition Cable Kit, part number 383-500-619, is built specifically for Ultra Commercial boiler sizes 550 and 750, supplying the ignition cable needed to fire the burner. Technicians use this kit when an ignition cable shows wear or damage during an inspection, since a failing cable can cause ignition lockouts or delayed ignition. Matching the kit to the correct boiler size keeps cable length and connector type correct for the installation.
  • Control Modules: The Ultra U-Control Module, part number 383-500-658, replaces the primary control board on Ultra Series UE boilers. Technicians install this module when the existing control board fails diagnostics or stops communicating with connected sensors. Because the control module manages ignition timing, sensor input, and modulation, a straight swap with the matched part number keeps the boiler's programmed parameters intact.
  • Electrical Components: The Transformer, part number 383-500-628, steps down 120 volt building power to the 24 volt control circuit used across Ultra Gas and Commercial boiler platforms. Technicians replace this part when a boiler loses control power entirely despite incoming line voltage being present. A failed transformer is a common root cause behind a boiler that shows no display or control activity at all.

Buying Guide

Confirm the exact Ultra Commercial boiler size, either 550 or 750 MBH, before ordering any part, since components like the ignition cable kit are built to match a specific size rather than sold as a universal fit. Pulling the model and serial information from the boiler's data plate avoids ordering a part sized for the wrong unit. Next, separate a sensor fault from a control fault using the boiler's diagnostic display before ordering a part. A temperature reading error typically points to the system temperature sensor or the return/supply sensor kit, while a boiler that fails to communicate with its sensors at all more often points to the control module itself. Swapping the wrong component first adds an extra trip and extra cost to a repair that a correct diagnosis would have caught. Check for building-wide electrical issues before replacing an electronic control outright. A boiler with no display or control activity sometimes traces back to a failed transformer rather than the control board, since the transformer feeds the 24 volt circuit the board depends on. Testing incoming transformer voltage before ordering a full control module replacement can save an unnecessary parts cost. Finally, keep Weil McLain Ultra Commercial Boiler Parts organized by size and function on a service truck, since commercial boiler downtime affects an entire building's heat or hot water rather than a single zone. Having the correct sensor, ignition, and transformer parts on hand for both the 550 and 750 sizes shortens a service call considerably.

Frequently Asked Questions

What boiler sizes do Weil McLain Ultra Commercial Boiler Parts fit?

Many parts in this category, including the ignition cable kit, are built specifically for the Ultra Commercial 550 and 750 MBH boiler sizes. Confirming the exact size from the boiler's data plate before ordering keeps the part matched correctly.

What does the Ultra U-Control Module do?

The Ultra U-Control Module, part number 383-500-658, serves as the primary control board for Ultra Series UE boilers, managing ignition timing, sensor input, and modulation. Technicians replace it when the existing board fails diagnostics or stops communicating with its sensors.

What is the difference between the system temperature sensor and the return/supply sensor kit?

The system temperature sensor, part 383-500-601, is a single sensor that monitors boiler water temperature, while the return/supply 2-sensor kit, part 383-500-602, covers both the return and supply sensor positions in one part number. Choosing between them depends on which sensor position is showing a fault.

Can a failed transformer cause a boiler to show no display at all?

Yes, the transformer steps down incoming 120 volt power to the 24 volt control circuit, and a failed transformer can leave a boiler with no display or control activity even though line voltage is present. Testing transformer output is a useful step before replacing a control module outright.

When does an ignition cable need replacement?

An ignition cable typically needs replacement when it shows visible wear or damage during inspection, or when the boiler experiences ignition lockouts or delayed ignition. The ignition cable kit for Ultra Commercial boilers is sized specifically for the 550 and 750 models.

Didn't find what you're looking for? 
Let us know
.