Weil Mclain Ultra Oil Boilers are cast iron oil boilers built around a three-pass heat exchanger and rated at 87% AFUE. The Ultra Oil line comes in three sizes with input ratings of 140, 168 and 196 MBH. Weil-McLain lists the family for residential and light commercial work, including indirect-fired water heating and radiant heating. Venting can be configured for a chimney or direct vent, and the boilers ship without a burner, so the burner is a separate purchase. Weil-McLain also certifies the Ultra Oil for biofuel blends through B100 when it runs with approved Beckett and Carlin burners. Contractors replacing aging oil equipment usually settle three things first: input size, venting method and burner choice. Ultra Oil Boilers matter because one cast iron platform covers each of those decisions with a short list of models that are easy to specify.
Subcategories
Buying Guide
Start with the heat loss of the building and match it to boiler output, not input. Ultra Oil input ratings are 140, 168 and 196 MBH, and SupplyHouse model listings also show output and IBR figures, so confirm which rating the load calculation calls for before ordering.
Next, settle the venting method. Weil Mclain Ultra Oil Boilers can be configured for chimney or direct vent, and the condition of the existing flue often decides which route is practical.
Then choose the burner. The boiler is sold without one, and Weil-McLain lists Beckett and Riello burners for the line. Match the burner firing rate to the boiler's burner capacity, such as the 1.2 GPH I=B=R figure listed for the UO-4 or the 1.4 GPH figure listed for the UO-5. If the customer plans to run biodiesel, confirm the burner is one of the approved Beckett or Carlin models for B100 operation.
Finally, think about the application. Weil-McLain lists the Ultra Oil for indirect-fired water heating and radiant heating, so check the system's supply temperature needs against the installation manual before committing to a size. Keep the separate burner purchase in mind when comparing total job scope between sizes. A short checklist of load, vent route and burner firing rate settles most Ultra Oil selections before the order is placed.
Frequently Asked Questions
What AFUE do Weil Mclain Ultra Oil boilers have?
Weil Mclain Ultra Oil Boilers are rated at 87% AFUE. The rating applies to the cast iron, three-pass Ultra Oil line from Weil-McLain. Check the specific model's documentation before quoting efficiency on a job.
Does an Ultra Oil boiler come with a burner?
No. SupplyHouse lists Weil Mclain Ultra Oil Boilers without a burner, so the burner is a separate purchase. Weil-McLain lists Beckett and Riello burner options for the line.
What input sizes does the Ultra Oil come in?
The Ultra Oil line comes in three input sizes: 140, 168 and 196 MBH. Output ratings for those sizes are 123, 148 and 173 MBH. The model names are UO-3, UO-4 and UO-5 on SupplyHouse.
Can an Ultra Oil boiler run on biodiesel?
Weil-McLain certifies its Ultra Oil residential oil boilers for biofuel blends through B100. The certification applies when the boiler runs with approved Beckett and Carlin burners. Confirm the burner model against Weil-McLain literature before firing biodiesel.
Can Ultra Oil boilers be chimney vented or direct vented?
Weil Mclain Ultra Oil Boilers can be configured for chimney or direct vent according to Weil-McLain product literature. Verify the vent components and clearances in the installation manual for the specific model before ordering.