White JG SpeedFit CTS Twist & Lock Reducing 90° Elbows are push-to-connect fittings that join copper, PEX, or CPVC pipe with no solder, glue, or tools required. Listings include a 3/4" x 1/2" size and a 1" x 3/4" size, both from John Guest. The Speedfit design uses a collet with stainless steel teeth that grips the pipe, plus an EPDM O-ring for the seal. The locking cap holds the pipe once twisted into place. Because each elbow joins two pipe sizes, confirming the size pair matters as much as the pipe material. For the 3/4" x 1/2" elbow, the listing notes that pipe inserts are required for heating applications and recommended for plumbing applications when connecting to PEX, and the inserts are sold separately. Checking pipe type, size pair, and insert needs before ordering keeps the install moving.
Subcategories
Buying Guide
Start with the two pipe sizes. Each elbow is listed with a size pair, such as 3/4" x 1/2" or 1" x 3/4", and the pair has to match the pipe on each end of the fitting. Measure or confirm both pipe sizes on the job before choosing a listing.
Next, check the pipe material and connection type. The John Guest listing says these elbows join copper, PEX, or CPVC pipe, and the 1" x 3/4" listing shows a CTS connection type. Confirm the pipe on the job fits the listed CTS connection type.
When comparing White JG SpeedFit CTS Twist & Lock Reducing 90° Elbows, look at pressure and temperature needs. The 3/4" x 1/2" model lists 160 psi at 73 deg F, 100 psi at 180 deg F, and 80 psi at 200 deg F. Ratings are model specific, so check the product page for any other size before relying on them.
Plan for pipe inserts when PEX is involved. The 3/4" x 1/2" listing notes that inserts are required for heating applications, recommended for plumbing applications, needed at each end connected to PEX, and sold separately. Add the correct number of inserts to the order with the elbows.
Finally, check the standards listed on the product page, since the 3/4" x 1/2" listing names NSF-61, ASTM F 877, and ASSE 1061 among others.
Frequently Asked Questions
Do JG Speedfit reducing 90 elbows need tools to install?
White JG SpeedFit CTS Twist & Lock Reducing 90° Elbows are push-to-connect fittings that join pipe with no solder, glue, or tools required. A collet with stainless steel teeth grips the pipe, and a locking cap holds it in place. Pipe inserts may be needed for PEX connections.
What pipe types do the Speedfit reducing elbows connect?
John Guest Speedfit reducing elbows join copper, PEX, or CPVC pipe, according to the listing description. The 1" x 3/4" listing shows a CTS connection type. Confirm the pipe on the job before ordering.
Do I need inserts when connecting these elbows to PEX?
For the 3/4" x 1/2" JG Speedfit reducing elbow, the listing notes that pipe inserts are required for heating applications and recommended for plumbing applications on PEX. An insert is needed for each end connected to PEX, and inserts are sold separately. Check the product page for other sizes.
What sizes do the white JG Speedfit reducing 90 elbows come in?
Listings for White JG SpeedFit CTS Twist & Lock Reducing 90° Elbows include 3/4" x 1/2" and 1" x 3/4" sizes from John Guest. Each elbow is listed with one size pair. Confirm both pipe sizes before ordering.
What are the pressure ratings on the JG Speedfit 3/4" x 1/2" reducing elbow?
The 3/4" x 1/2" JG Speedfit reducing 90-degree elbow lists 160 psi at 73 deg F, 100 psi at 180 deg F, and 80 psi at 200 deg F. Ratings apply to that model only, so check the product page for other sizes. The listing also shows an EPDM O-ring and a Lead Free rating of Yes.