White JG SpeedFit CTS Twist & Lock Stackable Tees are John Guest Speedfit push-to-connect tees used to build manifolds that join copper, PEX or CPVC pipe in any combination. John Guest states that no solder, glue or tools are required to make the connection. Products on this page include 1/2 x 1/2 x 1/2, 3/4 x 3/4 x 1/2 and 3/4 x 3/4 x 3/4 inch sizes. The stackable design lets the stem end insert into another Speedfit fitting. PEX connections need pipe inserts, sold separately, for heating applications, and the product notes recommend them for plumbing applications. The product description calls them the easiest and most dependable way to create a manifold. Because the tee stacks and takes mixed pipe types, size and insert selection drive the job.
Subcategories
Buying Guide
Start with the pipe sizes. Match the tee to the pipe at each connection, because the products on this page include 1/2 x 1/2 x 1/2, 3/4 x 3/4 x 1/2 and 3/4 x 3/4 x 3/4 inch sizes. For the 3/4 x 3/4 x 1/2 tee, check the product image, since the product page notes an image that shows the order in which sizes are listed.
Next, check the pipe material. John Guest Speedfit push-to-connect stackable tees join copper, PEX or CPVC pipe in any combination, so a single tee can serve mixed material runs.
Then plan for inserts. For PEX connections, the product notes state that inserts are required for heating applications and recommended for plumbing applications, with one insert for each tee end connected to PEX. A TSI20 insert is called out for the 1/2 x 1/2 x 1/2 tee and a TSI28 insert for the 3/4 x 3/4 x 3/4 tee. Inserts are sold separately, so add them to the order.
Consider how the manifold will be built. White JG SpeedFit CTS Twist & Lock Stackable Tees allow the stem end to be inserted into another Speedfit fitting, and the product description says no solder, glue or tools are required.
Finally, confirm the application. Check system requirements and local code for the intended use before choosing a fitting, since ratings and approvals come from the product documentation.
Frequently Asked Questions
What are White JG SpeedFit CTS Twist & Lock Stackable Tees used for?
White JG SpeedFit CTS Twist & Lock Stackable Tees are push-to-connect tees used to create manifolds. They join copper, PEX or CPVC pipe in any combination. The product description says no solder, glue or tools are required.
Do stackable tees need inserts on PEX?
For heating applications, yes. The product notes for these stackable tees say inserts are required for heating applications and recommended for plumbing applications when connecting to PEX. One insert is needed for each end of the tee connected to PEX, and inserts are sold separately.
Which insert goes with the 3/4 inch stackable tee?
The 3/4 x 3/4 x 3/4 stackable tee lists a TSI28 insert, and the 1/2 x 1/2 x 1/2 tee lists a TSI20 insert. The 3/4 x 3/4 x 1/2 tee notes that pipe inserts are required for heating applications and recommended for plumbing applications. Confirm the correct insert on the product page before ordering.
Can JG Speedfit stackable tees join different pipe types?
Per the product description, John Guest Speedfit stackable tees join copper, PEX or CPVC pipe in any combination. The stem end inserts into another Speedfit fitting. Confirm the pipe sizes and insert needs before installing.
What sizes are the White JG SpeedFit CTS Twist & Lock Stackable Tees?
Products on this page include 1/2 x 1/2 x 1/2, 3/4 x 3/4 x 1/2 and 3/4 x 3/4 x 3/4 inch tees. For the two 3/4 inch tees, the product page refers to an image that shows the order in which sizes are listed. Check that image before ordering.